|
New Equipment: By Type | By Manufacturer
|
|
All Listings >
Category: SANDERS-MULTI.HD/POLISHER
Showing 5 Machines
New Machine Listings
|
|
|
BUTFERING - SGO 211 RK TWO HEAD WIDE BELT SANDER
|
|
Price: $33,330.00
Machine Stock Number: SG0211-RK-Q
Condition: New
FOB: TX/OK
Electrical: 230 V, 3 Ph, 60 Cy
|
|
Description:
Two head 43 wide belt with a steel profiled contact roller followed by a combination head.
Contact roller head would include:
-a 160 mm diameter steel profile contact roller
-automatic height positioning
-grit compensation
-20 horse power motor
-cutting speed of 60 fps.
Combination head located in position #2 includes:
-65 shore profiled rubber contact drum
-automatic height positioning
- Air cushion sanding pad
- 18 horse power motor
-cutting speed of 60 fps.
Automatic thickness setting system with indexing control.
Rubberized hold down rollers before and after each sanding head.
Motorized workpiece thickness setting via joy stick control.
Millimeter and inch decimal LED thickness readout.
Variable speed conveyor 8 42 FPM.
Conveyor table mounted on four heavy duty jack screws.
Automatic conveyor belt tracking.
Electronic belt oscillation system.
Electronic motor braking system.
Over thickness protection system.
Safety interlocks on all access doors.
In feed roller extension.
Machine control voltage is 24 volt.
Emergency stops at infeed and out-feed locations.
Technical Specifications:
Working width 1100 mm ( 43 )
Abrasive Belt width 1120 mm ( 44 )
Abrasive Belt length 1900 mm ( 75 )
Workpiece thickness min. 3 mm ( 1/8 )
Workpiece thickness max. 160 mm ( 6 3/8 )
Variable conveyor speed 8 - 42 FPM
Feed motor 1 HP
Contact Roller - Head #1 20 HP 60 fps belt speed
Combination- Head #2 18 HP 60 fps belt speed
Electrical connection 230 Volts ( 460 Volts on request )
Amperage @ 230 V 3 phase 120 amps
Dust collection requirements 1800 CFM
Dust outlets two each 160 mm ( 6.25 )
Machine net weight 3960 lbs.
Price includes delivery, set-up and training once machine
has been connected to electrical, air and dust exhaust.
|
|
|
|
|
BUTFERING - SGO 311 RRK 3 HEAD WIDE BELT SANDER
|
|
Price: $46,485.00
Machine Stock Number: SGO311RRK-Q
Condition: New
FOB: G.R. MICH
Electrical: 230 V, 3 Ph, 60 Cy
|
|
Description:
Head # 1 is a 20 HP contact roller:
160 mm diameter steel profile contact roller; Automatic height positioning;
Grit compensation; Cutting speed of 60 fps.
Head #2 is a 20 HP contact roller:
160 mm diameter 85 shore profiled rubber contact roller; Automatic height positioning
Grit compensation; Cutting speed of 60 fps.
Head #3 is a 18 HP combination head:
65 shore profiled rubber contact drum; Automatic height positioning of the contact roller
Air cushion sanding pad; Cutting speed of 40 fps.
Automatic thickness setting system with indexing control.
Rubberized hold down rollers before and after each sanding head.
Motorized workpiece thickness setting via joy stick control.
Millimeter and inch decimal LED thickness readout.
Variable speed conveyor 8 42 FPM.
Conveyor table mounted on four heavy duty jack screws.
Automatic conveyor belt tracking.
Electronic belt oscillation system.
Electronic motor braking system.
Over thickness protection system.
Safety interlocks on all access doors.
In feed roller extension.
Machine control voltage is 24 volt.
Emergency stops at infeed and out-feed locations.
Technical Specifications:
Working width 1100 mm ( 43 )
Abrasive Belt width 1120 mm ( 44 )
Abrasive Belt length 1900 mm ( 75 )
Workpiece thickness min. 3 mm ( 1/8 )
Workpiece thickness max. 160 mm ( 6 3/8 )
Variable conveyor speed 8 - 42 FPM
Feed motor 1 HP
Electrical connection 230 Volts ( 460 Volts on request )
Amperage @ 230 Volt, 3 phase = 180 amps
Dust collection requirements 3200 CFM
Dust outlet head #1 160 mm ( 6.25 )
Dust outlet head #2 160 mm ( 6.25 )
Dust outlet head #3 160 mm ( 6.25 )
Compressed air requirements 90 PSI
Air consumption per cycle 4 CFM
Machine net weight 5060 lbs.
|
|
|
|
|
BUTFERING - SKO-213 RC 2-HEAD WIDE BELT SANDER
|
|
Price: $70,980.00
Machine Stock Number: SKO213RC-Q
Condition: New
FOB: MI, G.R.
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
Twin head 53 wide belt with one abrasive head for calibrating and one combination head for veneer and fine sanding of solid wood parts. Equipped with segmented pad sanding system. TE 1 Program control capable to store 50 programs.Constant pass line height of 35 ½. Head #1 with an 8 diameter steel profiled contact roller with height adjustable grit compensation of contact roller. Combination Head #2 with 85 shore, profiled rubber contact roller with height adjustable grit compensation of the contact roller and electronically controlled segmented pad with 35mm wide segments. Second head is equipped with variable abrasive belt speed of 7 60 FPS. Airjet belt cleaning system on Head #2. Rubberized hold down rollers throughout. Motorized workpiece thickness setting via program control. Workpiece thickness indicated on program control display Variable feed speed of conveyor. Automatic conveyor belt tracking. Electronic motor braking system and safety interlocks on all access doors. Over thickness protection system. In feed roller extension. Emergency stops at in feed and out feed locations.
Technical Specifications
Working width 1350 mm ( 53 )
Abrasive Belt width 1370 mm ( 54 )
Abrasive Belt length 19000 mm ( 75 )
Workpiece thickness min. 3 mm ( 1/8 )
Workpiece thickness max. 150 mm ( 5 7/8 )
Feed speed - Variable 2.5 13 m/min. ( 8 43 FPM )
Feed motor 1.7 kw (2.3 HP)
Head #1 30 HP
Combination - Head #2 25 HP
Variable abrasive belt speed head 2 7 60 FPS ( 2 28 m/s )
Total power required 36 kw
Electrical connection 460 volts
Amperage @ 460 70 amps
Dust collection requirements 3200 CFM
Dust outlet head #1 200 mm ( 8 )
Dust outlet head #2 200 mm ( 8 )
Dust outlet - air jet belt cleaning 2x 100 mm ( 4 )
Compressed air requirements 90 PSI
Air consumption 2 CFM (15 CFM with air blower on)
Machine net weight 2950 kg ( 6,490 lbs. )
Electrical connection: Single voltage 460 V. An optional 230 V transformer is available at additional cost.
Price includes delivery, set up, and training (Texas/Oklahoma only) once machine has been connected to air, electrical, and dust exhaust.
|
|
|
|
|
BUTFERING - STO 213RL TWO HEAD WIDE BELT SANDER
|
|
Price: $49,695.00
Machine Stock Number: STO213RL-Q
Condition: New
FOB: TX/OK
Electrical: 220 V, 3 Ph, 60 Cy
|
|
Description:
Two head 53" wide belt with a contact roller / combination head configuration for calibrating sanding and basic veneer sanding. Working width of 53.
Contact roller is a profiled steel 8 diameter roller with grit compensation.
Combination head with a 65 shore profiled rubber contact roller including grit compensation and air cushion pad with anti- dubbing feature.
Automatic thickness setting system with indexing control.
Pressure regulation control of the air cushion pad.
Rubberized hold down rollers.
Motorized workpiece thickness setting via joy stick control.
Millimeter and inch decimal led readout indicator.
Two speed conveyor feed of 14 or 28 FPM
Conveyor table mounted on four heavy duty double supported jack screws.
Automatic conveyor belt tracking.
Electronic belt oscillation system.
Electronic motor braking system.
Over thickness protection system.
Safety interlocks on all access doors.
In feed roller extension.
Machine control voltage is 24 volt.
Emergency stops at infeed and out-feed locations.
Technical Specifications:
Working width 1350 mm ( 53 )
Abrasive Belt width 1370 mm ( 54 )
Abrasive Belt length 1900 mm ( 75 )
Workpiece thickness min. 3 mm ( 1/8 )
Workpiece thickness max. 150 mm ( 5 7/8 )
Feed speed Two speeds 14 and 28 FPM
Feed motor 2.2 kw (3 HP)
Contact Roller - Head #1 30 HP
Combination - Head #2 25 HP
Total power required 46 kw
Electrical connection 230 Volts or 460 Volts
Amperage @ 230 90 amps
@ 460 180 amps
Dust collection requirements 2650 CFM
Dust outlet head #1 200 mm ( 8 )
Dust outlet head #2 200 mm ( 8 )
Compressed air requirements 90 PSI
Air consumption per cycle 2 CFM
Machine net weight 3000 kg ( 6,600 lbs. )
Price includes delivery, set-up, and training once machine has been connected to electrical,
air and dust exhaust.
|
|
|
|
|
BUTFERING - SWO 313 RRF WIDE BELT SANDER
|
|
Price: $79,990.00
Machine Stock Number: SW0313RRF-Q
Condition: New
FOB: TX/OK
Electrical: 220 V, 3 Ph, 60 Cy
|
|
Description:
Triple head 53" wide belt with a contact roller / contact roller / air cushion pad configuration for calibrating and white wood sanding of solid wood as well as basic veneer sanding.
Working width of 53. Rubberized hold down rollers throughout.
Contact roller #1 is a profiled steel 9.5 diameter roller including grit compensation and automatic positioning.
Contact roller #2 is a 55 shore, 9.5diameter profiled rubber covered roller including grit compensation and automatic positioning of the contact roller. Air jet belt cleaning.
Head #3 is an air cushion pad with rise and fall synchronized by the workpiece and feed speed. Abrasive belt speed is 30 FPS. Air jet belt cleaning.
Panel cleaning brush. Vacuum bed system with internal fan.
Automatic thickness setting system with control and LED readout in mm or inches .001.
Variable feed speed of conveyor 14 65 FPM. Automatic conveyor belt tracking.
Electronic belt oscillation system. Electronic motor braking system.
Over thickness protection system. Safety interlocks on all access doors.
Emergency stops at in feed and out feed. Machine control voltage is 24 volt.
Technical Specifications:
Working width 1350 mm ( 53 )
Abrasive Belt width 1370 mm ( 54 )
Abrasive Belt length 2620 mm ( 103 )
Workpiece thickness min. 3 mm ( 1/8 )
Workpiece thickness max. 160 mm ( 6 1/4 )
Feed speed - Variable 4 20 m/min. ( 14 65 FPM )
Feed motor 2.2 kw (3 HP)
Contact Roller - Head #1 34 HP
Contact Roller - Head #2 25 HP
Air cushion pad - Head #3 20 HP with 30 fps belt speed
Total power required 62 kw
Electrical connection 460 Volts or 230 Volts
Amperage @ 230 95 amps
@ 460 190 amps
Dust collection requirements 4000 CFM
Dust outlet head #1 180 mm ( 7 )
Dust outlet head #2 180 mm ( 7 )
Dust outlet - head #3 180 mm ( 7 )
Dust outlet - Panel cleaning brush 140 mm ( 5.5 )
Dust outlet - Vacuum bed 140 mm ( 5.5 )
Compressed air requirements 90 PSI
Air consumption per cycle 2 CFM
Machine net weight 4500 kg ( 9,920 lbs. )
Price includes delivery, set-up, and training once machine has been connected to electrical,
air and dust exhaust.
|
|
|
|
|
|
|
Showing 5 Machines |
Last Updated: 8/6/2010
|
|
