|
New Equipment: By Type | By Manufacturer
|
|
All Listings >
Category: SANDERS-(1) HD, WIDE/DRUM
Showing 5 Machines
New Machine Listings
|
|
|
BUTFERING - SBO 109 WIDE BELT SANDER
|
|
Price: $16,980.00
Machine Stock Number: SBO-109-Q
Condition: New
FOB: GRAND RAPIDS,MI
Electrical: 230 V, 3 Ph, 60 Cy
|
|
Description:
37” wide single head wide belt sander. Abrasive belt length of 75” for cost effective and quality sanding results. Combination Head with height adjustable steel contact roller and two sanding inserts for the sanding pad. Grit compensation. Electronic abrasive belt oscillation system. Hold down rollers in-feed and out-feed. Motorized workpiece thickness setting via joy stick control. Digital LED display for panel thickness in decimal inches (.001). Two speed feed of conveyor: 14 and 28 FPM. Conveyor table mounted on four heavy duty, double supported jack screws. Electronic motor braking system. Automatic conveyor belt tracking system. Conveyor drive roller is rubber covered for non-slip performance. Over thickness protection system. Safety interlocks on all access doors. Machine control voltage is 24 volt. Emergency stops at infeed and out-feed locations.
Technical Specifications:
Working width 950 mm ( 37” )
Abrasive Belt width 9700 mm ( 38” )
Abrasive Belt length 1900 mm ( 75” )
Workpiece thickness min. 3 mm ( 1/8” )
Workpiece thickness max. 150 mm ( 6” )
Feed speed – Two speed 14 FPM and 28 FPM
Feed motor 3/4 HP
Combination - Head 18 HP
Total power required 15 kw
Electrical connection 230 Volts or (460 Volts )
Amperage @ 230 V 50 amps
Dust collection requirements 840 CFM
Dust outlet – 160 mm ( 6 1/4” )
Compressed air requirements 90 PSI
Air consumption per cycle 1 CFM
Machine net weight 1100 kg ( 2,420 lbs )
This is a single voltage machine. A transformer may be required at time of installation.
Price includes setup and training by Stiles technician (Texas/Oklahoma only) once machine has been connected to air, electrical, and dust exhaust.
|
|
|
|
|
BUTFERING - SKO-113 C WIDE BELT SANDER
|
|
Price: $56,980.00
Machine Stock Number: SKO113C-Q
Condition: New
FOB: TX/OK
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
53" single head wide belt with a Combination Head for solid wood and veneer sanding. Equipped with a segmented pad sanding system. Patented CPS system using a mono-block construction to activate the segments. Segments are air activated in the on position and vacuum retracted in the off position. Combination Head with a steel profiled contact roller. Electronic segmented pad with 35 mm wide segments. Variable abrasive belt speed from 7 to 60 FPS. Air jet belt cleaning system for the abrasive belt. Rubberized hold down rollers throughout. Motorized workpiece thickness setting via program control. Workpiece thickness with digital display. Variable feed speed of conveyor. Automatic conveyor belt tracking. Electronic belt oscillation system. Electronic motor braking system. Over thickness protection system. Safety interlocks on all access doors.
Technical Specifications
Working width 1350 mm ( 53” )
Abrasive Belt width 1370 mm ( 54” )
Abrasive Belt length 1900 mm ( 75” )
Workpiece thickness min. 3mm ( 1/8” )
Workpiece thickness max. 150 mm ( 5 7/8 ” )
Feed speed - Variable 2.5 – 13 m/min. ( 8 – 43 FPM )
Feed motor 1.3 kw (2 HP)
Combination - 25 HP Head
Variable abrasive belt speed 7 – 60 FPS
Total power required 20 kw
Electrical connection 460 volts
Amperage @ 460 45amps
Dust collection requirements 2000 CFM
Dust outlet – combination head 180 mm ( 7” )
Dust outlet - air jet belt cleaning 2 x 100 mm ( 4” )
Compressed air requirements 90 PSI
Air consumption per cycle 2 CFM ( 15 CFM with air jet cleaner )
Machine net weight 2000 kg (4,400 lbs )
Electrical connection: Single voltage 460 V. An optional 230 V transformer is available at additional cost.
Price includes delivery, set up, and training (Texas/Oklahoma only) once machine has been connected to air, electrical, and dust exhaust.
|
|
|
|
|
BUTFERING - STO 113L WIDE BELT SANDER
|
|
Price: $33,980.00
Machine Stock Number: 113L
Condition: New
FOB: TX/OK
Electrical: 230 V, 3 Ph, 60 Cy
|
|
Description:
53" Single head wide belt with a Combination Head configuration for calibrating sanding and basic veneer sanding, 30 HP. Combination head with a steel profiled contact roller with grit compensation and air cushion pad with anti - dubbing feature. "Quick-Set" automatic thickness setting system with indexing control. Pressure regulation control of the air cushion pad. Hold down rollers. Motorized workpiece thickness setting via joy stick control.
Millimeter or inch decimal LED readout indicator. Two speed feed of conveyor 14 – 28 FPM. Conveyor table mounted on four heavy duty jack screws. Automatic conveyor belt tracking. Electronic belt oscillation system. Micrometer thickness gauge. Electronic motor braking system. Over thickness protection system. Safety interlocks on all access doors.
In feed roller extension. Machine control voltage is 24 volt. Emergency stops at infeed and out-feed locations.
Technical Specifications
Working width 1350 mm (53"), Abrasive Belt width 1370 mm (54"), Abrasive Belt length 1900 mm (75"), Workpiece thickness min. 3 mm (1/8"), Workpiece thickness max. 150 mm (5 ½"), Feed speed – Two speed 13 FPM and 26 FPM, Feed motor 1 HP
Combination - Head 30 HP, Total power required 25 kw, Electrical connection 230 Volts or 460 Volts, Amperage @ 230 80 amps @ 460 40 amps, Dust collection requirements 1300 CFM, Dust outlet 200 mm (8"), Compressed air requirements 90 PSI
Air consumption per cycle 2 CFM, Machine net weight 1800 kg (3,970 lbs)
Price includes delivery, set-up, and training (Texas/Oklahoma only) once machine has been connected to electrical, air and dust exhaust.
|
|
|
|
|
POWERMATIC - DDS-225 DRUM SANDER
|
|
Price: $3,599.00
Machine Stock Number: DDS225-Q
Condition: New
FOB: TX/OK
Electrical: 230 V, 1 Ph, 60 Cy
|
 |
Description:
Stock no. (1791290) Motor HP 5 HP; Voltage 230 1 Ph; Motor RPM 1,725; Elect. Controls 230V Magnetic; Sanding Drums (2) Diameter 6”; Drum Length 25”; Drum Speed 1,700 RPM; Conveyor Motor 1/4 HP; Conveyor Speed 8 and 12 SFPM; Max. Board Width 25”; Max. Board Thickness 5-1/4”; Min. Board Length 9”; Min. Board Thickness 1/32”; Dust Port Diameter 2 @ 4”; CFM Required 600 min. Shipping Weight 840 lbs. Overall Dimensions (LxWxH) 43” x 44”.
*NOTE: Promotional pricing good thru August 31, 2010 !
|
|
|
Click for a larger picture
|
|
POWERMATIC - WB-25 24" WIDE BELT SANDER
|
|
Price: $9,999.00
Machine Stock Number: WB25-Q
Condition: New
FOB: TX/OK
Electrical: 230 V, 3 Ph, 60 Cy
|
|
Description:
*Centralized controls allow you to access all the needed buttons right on one simple panel for
more convenience
*The variable feed speed belt allows you to accurately dial in the exact feed speed to best
suit your project and work environment
*Digital readout will show you the exact thickness of the finished piece or will allow the user
to preset exactly what thickness they would prefer for the finished piece
*The disc brake slows the machine quickly and kicks in to quickly stop the machine in an
emergency
*The air-eye system controls the oscillation for the sanding belts. This prevents the belt from
running off the end of the drums as well as as uses the sanding surface more uniformly
without leaving sanding lines on the work piece
*The auto thicknesser will capture the workpiece to give the user an exact thickness
*The three motor system allows for maximum horsepower to feed the sanding head; a second
smaller motor to directly power the VS feed belt; and a third smaller motor to easily and
automatically power the feed table up and down to the desired thickness.
Specifications:
Stock Number# 1790825
Working Width 25"
Max Thickness 6"
Minimum Board Length 12"
Main Drive Motor 15 HP
Power Feed Motor 1 HP
Table Hoist Motor 1/4 HP
Sanding Belt Size 25" x 75"
Dust Ports (2) 5"
Gross Weight 1760
NET Weight 1650
** Price includes delivery to your dock!**
|
|
|
|
|
|
|
Showing 5 Machines |
Last Updated: 8/6/2010
|
|
