|
New Equipment: By Type | By Manufacturer
|
|
All Listings >
Category: SANDERS-STROKE & EDGE
Showing 10 Machines
New Machine Listings
|
|
|
POWERMATIC - OES 9138 EDGE BELT SANDER
|
|
Price: $3,450.00
Machine Stock Number: OES9138-96
Condition: New
FOB: ADDISON, TX.
Electrical: 230 V, 3 Ph, 60 Cy
|
|
Description:
Stock Number 1791293, 9” x 138-3/4” edge sander with magnetic starter; 3 HP, 3 PH. 9 ½” x 48” platen size. 34 ½” to 40 ¾” working table height. 5 degree in and 45 degree out main table tilt. 45 degree out and 40 degree in end table tilt. 18” end table size. 4000 SFM belt speed. 24 oscillations/minute. 4 outboard, 9 drive drum diameter. (2) 4” diameter outlets. 1100 CFM. 86” 27” x 44 ½” machine dimensions. 870 lbs. shipping weight. SN: 0511OES9138291
**Subject to prior sale; one only at this price - $3,450! (Current List price $7,595 !)
|
|
|
|
|
POWERMATIC - OES-9138 EDGE BELT SANDER
|
|
Price: $4,795.00
Machine Stock Number: OES9138-Q
Condition: New
FOB: TX-OK
Electrical: 230 V, 3 Ph, 60 Cy
|
 |
Description:
Stock Number 1791293, 9” x 138-3/4” edge sander with magnetic starter; 3 HP, 3 PH. 9 ½” x 48” platen size. 34 ½” to 40 ¾” working table height. 5 degree in and 45 degree out main table tilt. 45 degree out and 40 degree in end table tilt. 18” end table size. 4000 SFM belt speed. 24 oscillations/minute. 4 outboard, 9 drive drum diameter. (2) 4” diameter outlets. 1100 CFM. 86” 27” x 44 ½” machine dimensions. 870 lbs. shipping weight.
** Price includes delivery to your dock!**
|
|
|
Click for a larger picture
|
|
RITTER - CR-205 EDGE SANDER
|
|
Price: $4,532.00
Machine Stock Number: 205503
Condition: New
FOB: CA-ANTIOCH
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
(CR205503) Model 205-50-6" x 132" edge sander with 3 HP TEFC motor, 8" x 50" graphite covered maple platen; fabricated steel base; hard maple tables and platens; swing away style dust/safety hood, precision ground aluminum drive and idle pulleys; magnetic starter; foam block/dead head combination. Air jet cleaning device, 6-way wooden front table adjustment; tilting wooden end table. 750 lbs.
OPTIONAL:
Add for 3 HP, 1 Phase, 220 Volt TEFC $295.00
Add for additional hardwood table oppposite side, non-tilting $800.00
Terms: 50% down with order, Balance Net 30 days with approved credit.
|
|
|
|
|
RITTER - CR-245 EDGE SANDER
|
|
Price: $7,450.00
Machine Stock Number: CR245728-Q
Condition: New
FOB: CA-ANTIOCH
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
(CR245728) 8" x 176" abrasive belt size, 6-way adjusting front table, edge belt sander with 7.5 HP TEFC motor, 10" x 72" hard maple platen, fabricated steel base, magnetic motor control, featuring swing away safety/dust hoof with air jet belt cleaning device; rubber covered aluminum drive pulley, 4" aluminum idler pulley, rigid tracking system. Tilting front table; tilting wooden end table; and raising and lowering device.
Optional:
12" x 176" abrasive belt capacity with 14" steel
platen and 10 HP drive motor $3,040.00
10" steel platen $ 940.00
Steel front table $1,045.00
Rear non-tilting steel table, steel platen and dust
hood less end table $2,305.00
Terms: 50% down with order, Balance Net 30 days with approved credit!
|
|
|
|
|
RITTER - CR-245 EDGE SANDER
|
|
Price: $6,295.00
Machine Stock Number: CR245568-Q
Condition: New
FOB: CA-ANTIOCH
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
(CR245568) 8" x 144" abrasive belt size, 6-way adjusting front table, edge belt sander with 7.5 HP TEFC motor, 10" x 56" graphite covered hard maple platen, fabricated steel base, magnetic motor control, featuring swing away safety/dust hoof with air jet belt cleaning device; rubber covered aluminum drive pulley, 4" aluminum idler pulley, rigid tracking system; tilting 6-way front maple table, 12" x 56" ; tilting end maple table; raising and lowering device; form block/dead head combination. 908 lbs.
Optional:
12" X 144" abrasive belt capacity with 10 HP motor ADD $2,830.00
10" Steel Platen $ 698.00
Steel front table $ 803.00
Rear nontilting steel table, steel platen and dust hood
less end table $2,095.00
Terms: 50% down with order, Balance Net 30 days with approved credit!
|
|
|
|
|
RITTER - CR25814 EDGE BELT SANDER
|
|
Price: $12,995.00
Machine Stock Number: 26814-Q
Condition: New
FOB: CA-ANTIOCH
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
Designed for dovetailed drawer boxes up to 13" high and 50" wide. Drawer boxes common to the furniture, cabinet and custom woodworking industry. The ability to use the machine for a variety of high platen sanding applications makes this the industry's largest vertical capacity sander.
STANDARD FEATURES: CR25814
14" x 144" abrasive belt size
16" x 56" graphite covered steel platen
10 HP spindle drive motor, tefc
1 HP oscillation motor
Precision oscillation guides rails
Standard duty idler assembly
11" x 50" bias tilting steel front work table
Manual table height adjustment
Right angle fence
(2) Swing away dust hoods
(2) 4" dust hood outlets
Air-Jet belt cleaning device
Top and Rear abrasive belt guard
Magnetic controls, 3-phase 230/460 volt
Oscillation / non oscillation selector switch
Machine weight: 1675 lbs
|
|
|
|
|
RITTER - R701 EDGE BELT SANDER
|
|
Price: $2,888.00
Machine Stock Number: 708
Condition: New
FOB: CA-ANTIOCH
Electrical: 230 V, 1 Ph, 60 Cy
|
|
Description:
With 4" x 49" platen size, 4" x 132" abrasive belt size, 1.5 HP, 1 phase 220 volt motor , manual starter, dust hoods (4"), end sanding kit with 3" diameter. Drum, and pedestal base.
Optional: E140 magnetic controls $395.00
Terms: 50% down with order, Balance Net 30 days with approved credit!
|
|
|
|
|
RITTER - R703 EDGE BELT SANDER
|
|
Price: $2,888.00
Machine Stock Number: 709
Condition: New
FOB: CA-ANTIOCH
Electrical: 220 V, 3 Ph, 60 Cy
|
|
Description:
* 4" x 132" abrasive belt size
* (2) 4" x 49" ground steel platens
* (2) bias tilting 12" x 65" worktables
* 2 h.p. drive motor, tefc
* manual controls with overload
* end sanding unit with 3" x 3" drum
* (2) 4" diameter dust hoods
* wired 3-phase 230 volt, 60 hz.
* designed and manufactured in the usa
Crate dimensions: 45" x 80" x 48"h Weight: 711 lbs
Optional:
E140, Magnetic Controls $395.00
Terms: 50% down with order, Balance Net 30 days with approved credit!
|
|
|
|
|
RITTER - R-901 EDGE BELT SANDER
|
|
Price: $3,995.00
Machine Stock Number: R901-Q
Condition: New
FOB: CA-ANTIOCH
Electrical: 230 V, 1 Ph, 60 Cy
|
 |
Description:
6" x 132" belt size. Double 6" x 49" steel platens. 3 HP motor. Manual controls accessible from both sides. Full dust hoods with 4" end openings for dust collection. Pedestal base. (2) 12" x 65" bias tilting tables. R 960 end sanding kit . Weight: 700 lbs.
Optional:
E140, Magnetic Controls $395.00
Terms: 50% down with order, Balance Net 30 days with approved credit!
|
|
|
Click for a larger picture
|
|
VALPATO - LS-2N FEED THROUGH EDGE SANDER (SINGLE SIDED)
|
|
Price: $22,175.00
Machine Stock Number: LS2N-Q20
Condition: New
FOB: NC-CHARLOTTE
Electrical: 460 V, 3 Ph, 60 Cy
|
 |
Description:
Profile sander with two oscillating abrasive belt units. Highest work piece to transport 80 mm, while the shortest length is 100 mm. The profile sander comes with an extension table to support large panels. The regulation of the axis and inclination is manual by an appropriate spanner. Dust hoods, spanner, and instruction book comes with the machine.
Specifications:
* Transport by feeding track with variable speed
from 5 to 25 Mt/min. (16.4 - 82.02 ft/min.)
* Sanding Belt dimensions: 80 x 2450 mm.
* Speed of the abrasive belts: 7 or 14 M/sec.
* Pneumatic tension of the abrasive belt.
* Timer for the exit and return of the pad.
* Mechanical oscillation.
* Air blowing system to keep clean and cool the
belt connected with the timer of the pad.
* Articulation of the unit : 135°
* Dust hood: 100 mm - 450 cfm each
* Consumption (each sanding belt unit):
-compressed air for working: 2,5 m³ / h 5 atm
-compressed air blower: 28 m³ / h 5 atm
* Overall dimensions: 3450 x 1400 x 1900mm.
* Net weight: 1050 Kg.
This machine was new in 2004 and sells today for over $36,000! Never put in service, terms cash with order. Setup and training available at additional cost. One only this price.
|
|
|
Click for a larger picture
|
|
|
|
Showing 10 Machines |
Last Updated: 8/6/2010
|
|
