|
New Equipment: By Type | By Manufacturer
|
|
All Listings >
Category: SAWS - RADIAL ARM
1-10 || 11-15
New Machine Listings
|
|
|
MAGGI - 700S RADIAL ARM SAW
|
|
Price: $6,299.00
Machine Stock Number: 700S-Q
Condition: New
FOB: CA-SANTA FE SPRINGS
Electrical: 230 V, 3 Ph, 60 Cy
|
|
Description:
7.5 HP radial arm saw with self-braking motor with overload protection and direct drive; Cast-iron arm with replaceable special-steel guides; Saw carriage sliding on the 8 bearing system; Blade guard with anti-noise system; Predisposed for air suction; Over-sized table size of 64" x 44". Maximum 22" dia. blade capacity - no blades included.
Technical Data:
Motor speed 2800 RPM
Cross cut (1" deep) 25".
Cross cut (8" deep) 20".
Max. depth of cut 8"
Max. height of blade from table 1-1/2"
Max. cutting height at 45 degrees 4-1/2"
Max. cut with arm at 45 degrees 18"
Max. blade diameter 22" (not included!)
Shaft dimension 1-3/16"
Net weight 550 lb; Gross weight 700 lb.
Overall dimension 79" x 40" x 51"
|
|
|
|
|
MAGGI - BEST960 RADIAL ARM SAW
|
|
Price: $3,768.00
Machine Stock Number: BEST 960-Q
Condition: New
FOB: CA-SANTA FE SPRINGS
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
With 4.5 HP, 220/3/60 motor; overload protection; blade guard with anti kickback device; pre-set locking position for 45 degree cuts (left and right sides); motor tilts to 45 degrees; cast iron support arm; special steel replacement guides; sealed ball bearings (8) system for sliding mechanism; easy height adjustment system with hand wheel; self braking motor; return spring.
Specifications:
Cross cutting capacity: 1" x 35" or 4" x 33"
Maximum depth of cut, 14" blade is 4"
Maximum depth of cut, 16" blade is 5"
Blade bore diameter 1"
Max. Height of blade from table:
3 1/2" table dimensions: 47" x 43"
weight (gross/net) 700/568
*Dado capacity: 3/4"
Options:
Single phase motor, 3 HP $ 100.00
Add for changing to 440 v for stock machine $ 150.00
Dado guard and flange $ 370.00
|
|
|
|
|
MAGGI - BIG 800 RADIAL ARM SAW
|
|
Price: $2,713.00
Machine Stock Number: BIG-Q
Condition: New
FOB: CA-SANTA FE SPRINGS
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
With 4.5 HP 220/3/60 motor; overload protection; blade guard with anti kickback device; preset locking position for 45 degree cuts (left and right sides); motor tilts to 45 degrees; cast iron support arm; special steel replaceable guides; sealed ball bearing (8) system for sliding mechanism; easy height adjustment system with handwheel; self braking motor; return spring.
Specifications:
Crosscutting capacity: 1" x 31" or 4" x 28" blade diam:14"
Miter capacity (45 degrees) 28" lt;22" rt arbor size: 1"
Max. Ht. Of blade from table: 4"
Table dimensions: 47" x 37"
Weight (gross/net) 436/394
*Dado capacity: 3/4"
Optional:
Single phase motor, 3 HP $100.00
Add for changing to 440 v on stock machine $150.00
Dado guard and flange $370.00
|
|
|
|
|
MAGGI - JUNIOR 640 RADIAL ARM SAW
|
|
Price: $2,509.00
Machine Stock Number: JR640-Q
Condition: New
FOB: CA-SANTA FE SPRINGS
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
With 4.5 HP 220/3/60 motor, overload protection; blade guard with anti-kickback device; preset locking position for 45 degree cuts (left and right side); motor tilts to 45 degrees; cast iron support arm; special steel replaceable guides; sealed ball bearing (8) system for sliding mechanism; easy height adjustment system with handwheel; self braking motor; return spring.
Specifications:
Crosscutting capacity: 1" x 25" or 4" x 21"
Blade diam: 14" miter capacity (45 degrees): 23" lt;18" rt
Arbor size: 1"
Max. Ht. Of blade from table: 3"
Table dimensions: 34" x 43"
Weight (gross/net): 400/374 lbs.
*Dado capacity: 3/4"
Optional:
Single phase motor, 3.5 HP, 220 volt $150.00
Add for changing to 440 v on stock machine $150.00
Dado guard and flange $370.00
|
|
|
|
|
MAGGI - PROFESSIONAL RADIAL ARM SAW
|
|
Price: $1,968.00
Machine Stock Number: PRO-Q
Condition: New
FOB: CA-SANTA FE SPRINGS
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
With 2.5 HP 3 phase 220 volt motor, overload protection, blade guard with anti-kickback device; preset locking position for 45 degree cuts; motor tilts to 45 degrees; cast iron support arm; special steel replaceable guides; sealed bearing (4) system for for sliding mechanism; easy height adjustment system with handwheel; self braking motor; and return spring.
Specifications:
Crosscutting capacity 15-3/4"
Blade diameter 12"
Maximum ht of blade from table 2-1/2"
Arbor size 5/8"
Table dimensions 22" x 31-1/2"
Weight (gross/net) 168/156 lbs.
Optional:
Add for single phase1.5 HP motor $100.00
|
|
|
|
|
NORTHFIELD - UNIPOINT X-36AF RADIAL ARM SAW
|
|
Price: $13,780.00
Machine Stock Number: 520
Condition: New
FOB: MN-NORTHFIELD
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
Uni-point heavy duty radial arm saw with 7.5 HP 3 phase 60 cycle 3400 rpm 220/440 v motor and controls. 27" x 48 hardwood laminated table top 2" thick; heat treated telescope ram, 32 wide steel roller bearings, hardened steel bearing ways; crosscut capacity with guide fence in regular position - 17-1/2" 25" capacity with guide fence in rear position; 23-1/2" ripping cap. Between saw and regular guide fence, 31" ripping cap. With guide fence in rear position; 4-1/2" depth of cut with 16" blade; motor raises 10-1/4" from center of arbor to table top, saw tilts 45 degrees left; pivots 70 degrees right 45 degrees left, 48' x 60" floor space; 16" 16" saw guard with under carriage (less blade); 1" stress proof shaft, accommodates 1-9/16" dado cutting equipment; spacers, loose collar and nut. mag.starter with push button control; auto. Ram return; arbor wrench, maintenance tools; complete operating instruction manual. Shipping weight 1000 lbs.
Optional:
Hydraulic crossfeed power unit $4,710.00
(2) rolling tables 17-1/2" wide, 7 rolls for
attachment to both sides of table giving
10' each side of saw blade includes legs $ 950.00
Graduated gauge and 6 stops, left side,
plain fence right side, 10' each side of saw
blade $ 680.00
deep dado cover for 16" guard $ 200.00
|
|
|
|
|
ORIGINAL - 3512 12" RADIAL ARM SAW
|
|
Price: $2,950.00
Machine Stock Number: 3512-C39
Condition: New
FOB: DFW TX.
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
Contractor Series with medium arm (24” crosscut), auto carriage return; automatic Electro-mechanical brake; TEFC motor; powder coated frame, and legs from heavy gauge steel. Low voltage up front ON/OFF pushbuttons and full magnetic starter with overload protection. Made in USA
Specifications:
Blade Size 12” diameter
Arbor Size 1” x 2 3/16”
Motor HP 3 HP
Max Cross Cut 1” stock 24 ¼”
Max Cross Cut 3” stock 21 ¼”
Max Miter 45 degree 1” stock 16”
Max Depth of cut 3 1/16”
Max Dept of cut 45 degree Bevel 1 ¼”
Table Size 26” D x 34” W
O.A. Size 37” D x 34” W x 53” H
Normal List Price, fob factory $3,614!
S/N: 02 03 30 560 (new in 2003)
S/N: 03 04 30 675 (new in 2003)
|
|
|
|
|
ORIGINAL - 3531-03 RADIAL ARM SAW
|
|
Price: $5,363.00
Machine Stock Number: 3531-Q
Condition: New
FOB: IA-BRITT
Electrical: 230 V, 3 Ph, 60 Cy
|
|
Description:
14" radial arm saw, with 16" crosscut capacity, 5 HP 3 phase TEFC motor and 24 volt push button controls. Includes 32" turret arm design for more accurate cuts, automatic cutterhead return attachment, automatic electro-mechanical brake, and precision machined track arm with eight wide ball bearings in rollerhead. Dimensions are 59" high, 44" wide, and 33" deep. Shipping weight is 560 lbs.
Cutting capacities:
Maximum out-rip 29-7/8"
Maximum cross cut 1" stock 16"
Maximum miter 45 1" stock 10-7/8"
Maximum depth of cut 4-1/8"
Maximum depth of cut at 45 1 3/4"
Options:
Mist coolant system 030401- $563.00
Shipment 2 weeks aro plus deposit; terms 25% down net 30 with approved credit.
|
|
|
|
|
ORIGINAL - 3541 RADIAL ARM SAW
|
|
Price: $5,634.00
Machine Stock Number: 3541-Q
Condition: New
FOB: IA-BRITT
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
16" radial arm saw, with 16" crosscut capacity, 5 HP 3 phase 230/460 volt TEFC motor and 24 volt push button controls. Includes 32" turret arm design for more accurate cuts, automatic cutterhead return attachment, automatic electro-mechanical brake, and precision machined track arm with eight wide ball bearings in rollerhead. Dimensions are 70" high, 46" wide, and 39-1/2" deep. Shipping weight is 560 lbs.
Cutting capacities:
Maximum out-rip 29-7/8"
Maximum cross cut 1" stock 16"
Maximum miter 45 1" stock 10-7/8"
Maximum depth of cut 4-15/16"
Maximum depth of cut at 45 2"
|
|
|
|
|
ORIGINAL - 3546 SAW-RADIAL ARM
|
|
Price: $5,918.00
Machine Stock Number: 3546-Q
Condition: New
FOB: IA-BRITT
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
16" radial arm saw with 24" crosscut capacity, 5 HP 3 phase 230/460 volt TEFC motor and 24 volt push button controls. Includes 32" turret arm design for more accurate cuts, automatic cutterhead return attachment, automatic electro-mechanical brake, and precision machined track arm with eight wide ball bearings in rollerhead. Dimensions are 70" high, 46" wide, and 39-1/2" deep. Shipping weight is 600 lbs.
Cutting capacities:
Maximum out-rip 29-7/8"
Maximum cross cut 1" stock 24"
Maximum miter 45 1" stock 10-7/8"
Maximum depth of cut 4-15/16"
Maximum depth of cut at 45 2"
Maximum Dado capacity 13/16"
Delivery time: 2-3 weeks
|
|
|
|
|
ORIGINAL - 3553 SAW-RADIAL ARM
|
|
Price: $8,118.00
Machine Stock Number: 3553-Q
Condition: New
FOB: IA-BRITT
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
20" radial arm saw with 23" crosscut capacity, 7.5 HP 3 phase 230/460 volt tefc motor and 24 volt push button controls. Includes 44" turret arm design for more accurate cuts, automatic cutterhead return attachment, automatic electro-mechanical brake, and precision machined track arm with eight wide ball bearings in rollerhead. Dimensions are 73-3/4" high, 50" wide, and 49-7/8" deep. Shipping weight is 925 lbs.
Cutting capacities:
Maximum out-rip 40-3/4"
Maximum cross cut 1" stock 23"
Maximum miter 45 1" stock 17-1/2"
Maximum depth of cut 6-1/4"
Dado 12" x 1-5/8"
|
|
|
|
|
|
|
1-10 || 11-15 |
Last Updated: 8/6/2010
|
|
