|
New Equipment: By Type | By Manufacturer
|
|
All Listings >
Category: RADIO FREQ.GLUER
Showing 2 Machines
New Machine Listings
|
|
|
RFS-PROTECH - SL-3648 RADIO FREQ EDGE GLUER
|
|
Price: $28,500.00
Machine Stock Number: SL3648-Q
Condition: New
FOB: N.C.
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
An economical, high quality edge gluer with the platen mounted on a 45-degree angle for easy loading and placement of stock within the press. The press features pneumatic pressure on the edge of the panel to close the joints; and a 4 kW RfsProtech Generator to rapidly cure the glue joints. The press is complete with all required safety circuits and controls required for safe operation. The ergonomics of the press, the control over stock placement, the small footprint, and the affordable price; all these features have made the Model SL3648 the favorite workhorse for users from the smallest shops to the largest woodworking companies.
Press Specifications:
A.Curing area: 36” x 48” x 2” thick. Larger sizes available on request.
B.Clamping pressure is applied by multipower (dual pistons on a common shaft) pneumatic cylinders to maximize pressure while relying on standard plant pressures. Unlike presses without multipower cylinders, which require booster compressors, the Model SL3648 reaches full capacity at 100-psi plant air pressure.
C.Edge pressure is applied by six (6) each pusher shoes, each with a 4” bore x 4” stroke twin-piston multipower pneumatic cylinder.
D.Top platen pressure is applied by two (2) 3 ¼” diameter x 20” stroke pneumatic cylinders that keeps the footprint to a minimum while still allowing the operator full access to the platen area.
E.The platen is set at a 45-degree angle and the top platen opens wide; allowing the operator to step inside the press for ergonomic and accurate parts placement.
F.The internal solid state RfsProtech 4kW ( Generator cures approximately 400 square inches of glue line per minute.
G.The Generator features solid state rectifiers and all aluminum cabinet for maximum conductivity and superior performance.
H.Two-hand no-tie-down safety controls for closing the top platen.
I.Controls are simple to understand, and are complete with the required push-buttons, switch, meters, digital operator display, and on-screen troubleshooting diagnostics.
J.The machine is controlled by a PLC for dependability and efficient maintenance. All controls will be provided for safe and efficient operation. The operator screen permits efficient operation, and the included press diagnostics screens assist in trouble-shooting when the need arises.
K.Proper interfaces will be provided for operational signals and emergency system stop.
L.All necessary RF controls, including buttons, meters, and PLC operator interface panel are mounted on a control panel attached to the left front of the press.
M.Interlocked top platen and safety switches on all access doors insure operator safety.
N.Power requirements are 230 or 460 volt, 60 cycle, 3 phase electric. Other voltages are available, please specify. Amps on 230 volt is 60; and 30 amps on 460 volts.
O.Circuit breaker protection is provided. A service disconnect is required for safety, but is not provided.
Options:
1.Upsize the RF Generator from 4kW to 6kW, which can cure approximately 600 square inches of glue line per minute $2,035.00
2. 4-Way Pressure: Add two (2), 4” diameter multi-power pneumatic cylinders on movable mounts for closing of miter joints $2,750.00
3. 4-Way Pressure: Add four (4), 4” diameter multi-power pneumatic cylinders for the edge banding of panels $3,850.00
4. Manual lay-up table with slide bar $2,250.00
5. Hand crank in-feed table $3,1450.00
6. Powered in-feed table with motor and controls $4,190.00
7. Steel deck out-feed table $1,825.00
8. Black Brothers Model 40C-8R 8” Table Top Glue Spreader $ 1,750.00
9. Low Pressure switch, to bring in cylinders at half-pressure $ 500.00
10. To add to in-feed table (per foot) $ 300.00
11. Hydraulic pressure in leau of pneumatic $ 4,500.00
12. Includes setup and training by Factory Tech BUT less travel and living expenses - billed
separately after install at prevailing rates.
13. For a 36" x 60" capacity size … add $3,000.00
Terms: 50% down with order, 40% prior to shipping, balance net 30 days from ship date.
|
|
|
Click for a larger picture
|
|
RFS-PROTECH - SL-3660 RADIO FREQ EDGE GLUER
|
|
Price: $34,875.00
Machine Stock Number: SL3660.6Q38C
Condition: New
FOB: N.C.
Electrical: 230 V, 3 Ph, 60 Cy
|
|
Description:
An economical, high quality edge gluer with the platen mounted on a 45-degree angle for easy loading and placement of stock within the press. The press features pneumatic pressure on the edge of the panel to close the joints; and a 6 kW RfsProtech Generator to rapidly cure the glue joints. The press is complete with all required safety circuits and controls required for safe operation. The ergonomics of the press, the control over stock placement, the small footprint, and the affordable price; all these features have made the Model SL3648 the favorite workhorse for users from the smallest shops to the largest woodworking companies.
Press Specifications:
A. Curing area: 36” x 60” x 2” thick. Larger sizes available on request.
B. Clamping pressure is applied by multipower (dual pistons on a common shaft) pneumatic cylinders to maximize pressure while relying on standard plant pressures. Unlike presses without multipower cylinders, which require booster compressors, the Model SL3648 reaches full capacity at 100-psi plant air pressure.
C. Edge pressure is applied by seven (7) each pusher shoes, each with a 4” bore x 4” stroke twin-piston multipower pneumatic cylinder.
D. Top platen pressure is applied by two (2) 3 ¼” diameter x 20” stroke pneumatic cylinders that keeps the footprint to a minimum while still allowing the operator full access to the platen area.
E. The platen is set at a 45-degree angle and the top platen opens wide; allowing the operator to step inside the press for ergonomic and accurate parts placement.
F. The internal solid state RfsProtech 6kW ( Generator cures approximately 600 square inches of glue line per minute.
G.The Generator features solid state rectifiers and all aluminum cabinet for maximum conductivity and superior performance.
H. Two-hand no-tie-down safety controls for closing the top platen.
I. Controls are simple to understand, and are complete with the required push-buttons, switch, meters, digital operator display, and on-screen troubleshooting diagnostics.
J. The machine is controlled by a PLC for dependability and efficient maintenance. All controls will be provided for safe and efficient operation. The operator screen permits efficient operation, and the included press diagnostics screens assist in trouble-shooting when the need arises.
K. Proper interfaces will be provided for operational signals and emergency system stop.
L. All necessary RF controls, including buttons, meters, and PLC operator interface panel are mounted on a control panel attached to the left front of the press.
M. Interlocked top platen and safety switches on all access doors insure operator safety.
N. Power requirements are 230 or 460 volt, 60 cycle, 3 phase electric. Other voltages are available, please specify. Amps on 230 volt is ? ; and ? amps on 460 volts.
O. Circuit breaker protection is provided. A service disconnect is required for safety, but is not provided.
Options, fob factory, 3-4 weeks to ship:
1. Manual lay-up table with slide bar $2,250.00 *
2. Hand crank in-feed table $3,1450.00 *
3. Powered in-feed table with motor and controls $4,190.00 *
4. Steel deck out-feed table $1,825.00 *
5. Black Brothers Model 40C-8R 8” Table Top Glue Spreader $ 1,750.00 *
6. To add to in-feed table (per foot) $ 300.00
7. Includes setup and training by Factory Tech BUT less travel and living expenses - billed
separately after install at prevailing rates.
Terms: 90% down with order, balance net 30 days from ship date, with approved credit
|
|
|
|
|
|
|
Showing 2 Machines |
Last Updated: 8/6/2010
|
|
