|
New Equipment: By Type | By Manufacturer
|
|
All Listings >
Category: PLANERS
Showing 8 Machines
New Machine Listings
|
|
|
IRONWOOD - P630 SINGLE SURFACE PLANER
|
|
Price: $11,990.00
Machine Stock Number: P630H-128
Condition: New
FOB: ADDISON, TX.
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
24.75" wide by 4 diameter Spiral Cutterhead with carbide inserts - 6 rows 30 X 12 X 1.5 mm
cutters mounted on angle for Shear cut.
Sectional infeed roller and chipbreaker (1/4 independent yield).
Two (2) 73mm (3) diameter idler rolls in table.
Quick-set table roll adjustment via lever-raises and lowers from 0 to .05.
Power raise and lower of table.
Four (4) heavy duty table jack screws.
Variable feed speeds from 20 to 39 feet per minute
Exhaust hood with 6 outlet, 950 cfm
Magnetic controls.
Specifications:
Planing width 24.75
Planing thickness 12
Maximum depth of cut 5/16
Minimum part length 8-3/4
Table size 27 X 34
Cutterhead motor 10 HP
Feed motor 1 HP
Table raise/lower motor ½ HP
Dust hood/cfm 6 diameter/950 cfm
Floor space 52 X 38 X 48 High
Weight 2100 Lbs.
Optional: Extra set of 93 carbide inserts 30 X 12 X 1.5 mm, add
.$ 275.00
**SPECIAL SALE PRICE
..one only, $11,495.00 !!
|
|
|
Click for a larger picture
|
|
NORTHFIELD - NO. 7-25" SINGLE SURFACE PLANER
|
|
Price: $26,680.00
Machine Stock Number: #7-Q
Condition: New
FOB: MN-NORTHFIELD
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
With 25" x 8-3/4" capacity (straight knife); with sealed for life ball bearings on cutterhead, and 4 power driven 4" feed rollers; safety HSS 4 kf. Cutterhead; 5" cutting circle; sectional infeed rolls with 2" ductile iron sections; .001 - .075" adj. Lower power driven feed rollers; cutterhead brake, set of HSS knives 4 ea.; 5/32" x 1-1/4" x 25", manual feed indicator; 1-1/2 HP TEFC motor driven feed mechanism from 20-100 fpm; reversing safety switch on feed mechanism; dbl. Magnetic switch with overload and low voltage protection and separate start-stop push button station; with 20 HP TEFC belt driven 3600 motor. 3200 lbs.
Optional:
Shaving hood for blower system - 8" dia. $ 350.00
Helical carbide cutterhead 5" cutting circle $3,390.00
Knife grinding and jointing attachment for
helical carbide head (cap.= 24") $ 2,470.00
Hard chrome plated edge on holddown bar $ 170.00
Limit switch for hand break (cuts power) $ 160.00
Digital readout - thickness $ 780.00
Dial type roll setting guage $ 160.00
Terms: 30% down with order; 40% prior to shipping; balance net 30 from shipping with
approved credit.
|
|
|
|
|
NORTHFIELD - NO. 737 PLANER
|
|
Price: $30,510.00
Machine Stock Number: 514
Condition: New
FOB: MN-NORTHFIELD
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
New Northfield No.737 planer-surfacer, with 37" x 8-3/4" cap.; with sealed for life ball bearings on cutterhead, and 4 power driven 4" feed rollers; safety HSS 4 kf. Cutterhead; 5" cutting circle; sectional infeed roll with 2" ductile iron sections; .001 to .075" adj. Lower power driven feed rollers; cutterhead brake, set of HSS knives 4 ea.; 5/32" x 1-1/4" x 37", manual feed speed indicator;2 HP TEFC motor driven feed mechanism from 20-100 fpm; reversing safety switch on feed mechanism; dbl. Magnetic switch with overload and low voltage protection and separate start-stop push button station; with 30 HP TEFC belt driven 3600 rpm motor. Approx. shipping weight 3900 lbs.
Optional:
Shaving hood for blower system - 8" dia $ 560.00
Power lift table with handwheel for fine
adjustment $2,290.00
Helical carbide cutterhead (cap.= 36") $6,000.00
Knife grinding and jointing attachment for
helical carbide head $2,930.00
Dial type roll setting gauge $ 160.00
Delivery: 6-8 weeks
|
|
|
|
|
NORTHFIELD - NO. 8-31" PLANER
|
|
Price: $28,740.00
Machine Stock Number: 515
Condition: New
FOB: MN-NORTHFIELD
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
With 31 x 8-3/4" cap.; with sealed for life ball bearings on cutterhead, and 4 power driven 4" feed rollers; safety HSS 4 kf. Cutterhead; 5" cutting circle; sectional infeed rolls with 2" ductile iron sections; .001 - .075" adj. Lower power driven feed rollers; cutterhead brake, set of HSS knives 4 ea.; 5/32" x 1-1/4" x 31", manual feed indicator; 2 HP TEFC motor driven feed mechanism from 20-100 fpm; reversing safety switch on feed mechanism; dbl. Magnetic switch with overload and low voltage protection and separate start-stop push button station; with 30 HP TEFC belt driven 3600 rpm motor. 3500 lbs.
Optional:
Shaving hood for blower system - 8" dia $ 380.00
Power lift table with handwheel for fine
adjustment $2,290.00
Helical carbide cutterhead (cap.= 30") $3,950.00
Knife grinding and jointing attachment for
helical carbide head $2,600.00
Limit switch for hand brake $ 160.00
Dial type roll setting gauge (helical head) $ 160.00
Hard chrome plated edge on holddown bar $ 180.00
Digital readout $ 780.00
|
|
|
|
|
POWERMATIC - 201 PLANER
|
|
Price: $4,999.00
Machine Stock Number: 201-3-Q
Condition: New
FOB: TX-OK
Electrical: 230 V, 3 Ph, 60 Cy
|
 |
Description:
(1791262) 22 Planer. 7 ½ HP, 3 PH. 3/16 max. depth cut; 1/8 min. thickness, 9 Ό max. thickness. 10 minimum work piece length. 3 Ό cutterhead diameter. 4 knives. 4800 RPM cutterhead speed. 2 column table support. 3 diameter segmented infeed roller. 2 speeds feed speed. 2 bed rollers adjustable from front. 5 dust connect diameter. 900 CFM minimum required. Tools supplied. Overall dimensions 39 x 49 x 53. Gross weight 1430 lbs.
**Model 1791268 with Byrd Shelix insert carbide cutterhead
$6,299.00
Available in single phase 230 Volt now - same pricing!
** Price includes delivery to your dock! Price GOOD through August 31, 2010
|
|
|
Click for a larger picture
|
|
POWERMATIC - 209 PLANER
|
|
Price: $2,399.00
Machine Stock Number: 209-Q
Condition: New
FOB: TN-MCMINNVILLE
Electrical: 230 V, 3 Ph, 60 Cy
|
 |
Description:
Stock No. (1791297) 20 planning capacity with 5 HP motor. 8 maximum thickness 3/32 depth of cut; 6-3/4 minimum planning length; (4) knives; 5000 RPM cutterhead speed. Approx. 20,000 cuts per minute. 3-3/16 cutterhead diameter. 20 x 1 x 1/8 blade size. 24 and 31 FPM. 5 dust port and 900 CFM requirement. Overall dimensions 26 x 36 5/8 x 41 3/8; Shipping weight 880 lbs.
Optionals:
Stock # 1791296 5 HP, 1 Ph
. Same pricing!
*NOTE: Promotional pricing good thru August 31, 2010 !
|
|
|
Click for a larger picture
|
|
POWERMATIC - 209HH PLANER
|
|
Price: $3,599.00
Machine Stock Number: 209HH-1PH
Condition: New
FOB: TX/OK
Electrical: 220 V, 1 Ph, 60 Cy
|
|
Description:
(#1791315) With Byrd "Shelix" Helical Carbide cutterhead, 132 four sided insert knives; 5 HP motor, 20" max. cutting width, 8" max. thickness, up to 3/32" depth of cut; 6-3/4" min. planing length; 5000 RPM cutterhead speed; feed speeds 12, 16, 24, and 31 FPM; 5 " dust port; 900 CFM required. Overall dimensions 26" x 36-5/8" x 41-3/8". Shipping weight 890 lbs.
For model #1791316 but with 5 HP, 3 phase, 220 volt motor, etc.
. $3,599.00 !
OPTIONS:
2230002 Bed and feed roller setting gauge $199.00
1791212 Set of 10 carbide inserts for Shelix head $ 45.00/set
*NOTE: Promotional pricing good thru August 31, 2010 !
|
|
|
|
|
POWERMATIC - WP2510 PLANER
|
|
Price: $11,999.00
Machine Stock Number: WP2510-Q
Condition: New
FOB: TX/OK
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
Solid steel helical insert head with four-sided carbide insert tooling, no adjustment required after changing knives. Reduced sound levels when running & cutting
Built with digital readout & simple PC controller making set-up quick and easy for table heights
Segmental serrated infeed roll with segmental chip breakers for planning multiple height stock. Each segment has independent yield of 1/4"
3" diameter In/Outfeed rollers are supported by four large sealed needle bearings for long life
Quick-Set micro-adjustable table rollers lever, easily raises and lowers table rollers from 0" to 0.05" at a touch
Frame machined from heavy cast iron and extra wide side panels with gibs offer rigid bed support and accurate alignment
Solid pressure bar has wide foot for long wear and can be adjusted on both ends for accurate alignment
Feed selector allows you to change feed rate from low to high with ease
Large 32-3/16" x 26" precision-ground table contains two adjustable table rollers for smooth feeding of uneven stock
Massive gear box uses large chain drive to power the sectional serrated infeed roll and large outfeed roller for maintaining a positive feed
Gear box incorporates the automatic chain tensioners
Air-hydraulic dust hood features an excellent dust collection system with built-in 5" dust chute
Stock Number 1791303
Maximum Cutting Width (in.) 25
Maximum Cutting Thickness (in.) 9
Full Width Cutting Depth (in):10-3/8" wide to 25" = up to 1/8"
Maximum Cutting Depth (in.) if less than 10-3/8" = up to 1/4"
Minimum Planning length (in.) 168 Four-sided inserts
Segmented Infeed Roller Diameter (in.) 3
Steel Outfeed Roller Diameter (in.) 3
Cutter head Speed (RPM) 5,000
Cuts Per Minute 30,000
Cutter head Diameter (in.) 3-3/8"
Feed Rate (FPM) 30-25/20
Dust Chute Diameter (in.) 5"
Table Area (DxW/in.) 32-3/16x26
Main Drive Motor 15 HP, 3 Ph, 230/460V, Prewired 230V
Table Hoist Motor 1/2 HP, 3Ph
Overall Dimensions (LxWxH/in.) 52 x 36 x 59
Net Weight (lbs.) 1725
** Price includes delivery to your dock!**
*NOTE: Promotional pricing good thru August 31, 2010 !
|
|
|
|
|
|
|
Showing 8 Machines |
Last Updated: 8/6/2010
|
|
