|
New Equipment: By Type | By Manufacturer
|
|
All Listings >
Category: MATERIAL CONVEYORS/LIFTS
1-10 || 11-15
New Machine Listings
|
|
|
DOUCET - XPRS RETURN CONVEYOR
|
|
Price: $9,580.00
Machine Stock Number: XPRS-Q
Condition: New
FOB: CANADA-TORONTO
Electrical: 110 V, 1 Ph, 60 Cy
|
 |
Description:
XPRS Return Conveyors are available in two models, featuring 24 or 36 inch wide return rollers. The standard receiving module is 24" or 36" wide X 60" long. The return conveyor length is proportionate to the length of the Edgebander it services.
Feed rollers, driven by a DC variable speed motor from 0 to 40 ft/min, guide the part onto the receiving module. Polymer belts side shift the panels to the return rollers quickly and efficiently. The transfer process occurs on a continuous basis.
XPRS-24-5-13
A 24" wide x 60" long receiving module, a 24" wide x 13' long return
conveyor, two (2) feed rollers and four (4) non-motorized infeed arms. $ 9580.00
XPRS-36-5-13
A 36" wide x 60" long receiving module, a 36" wide x 13' long return
conveyor, two (2) feed rollers and four (4) non-motorized infeed arms. $10,710.00
OPTIONAL FEATURES
Additional return conveyor length, sold by increments of 2 feet : $ 490.00
Motorized Feed Roller Extension $ 515.00
Terms: 30% down with order; net 30 days from ship date, with approved credit.
|
|
|
Click for a larger picture
|
|
DOUCET - BT3 RETURN CONVEYOR
|
|
Price: $15,220.00
Machine Stock Number: BT3-Q
Condition: New
FOB: CANADA-TORONTO
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
Featuring right angle "belt" transfer for sensitive surfaces. Motorized receiving conveyor, with variable speeds from 30-90 fpm. The receiving conveyor is 24" wide x 5' long, and the standard return conveyor is 24" x 15' long with 60 to 180 fpm return speed. Each conveyor is powered by a 1/2 HP motor. The rollers are p.v.c. covered; sealed bearings on both ends; on 3" centers for the first 18" of travel and 4-1/2" centers thereafter.
Options:
For model BT3-30 as above, but 30" wide, add $1,125.00
" BT3-36 " " " 36" " " $2,245.00
" BT3-48 " " " 48" " " $4,500.00
" BT3-60 " " " 60" " " $6,750.00
Additional length of receiving conveyor, transfer
and return for BT3-24, BT3-30 & BT3-36...
A 2 foot extension for a total length of 7 feet $1,940.00
A 4 foot extension for a total length of 9 feet $3,285.00
Additional length of receiving conveyor, transfer
and return for BT3-48, BT3-60...
A 2 foot extension for a total length of 7 feet $3,860.00
A 4 foot extension for a total length of 9 feet $6,315.00
Additional return conveyor length =/Additional return conveyor length >BT-36 $ 490.00 /ft
Additional motorized infeed arm $ 325.00
Panel deviator (for parts < 6" wide) $ 885.00
Terms: 30% down with order; net 30 days from ship date, with approved credit.
|
|
|
Click for a larger picture
|
|
DOUCET - FEEDBACK RETURN CONVEYOR
|
|
Price: $7,915.00
Machine Stock Number: FEEDBACK-Q
Condition: New
FOB: CANADA-TORONTO
Electrical: 110 V, 1 Ph, 60 Cy
|
 |
Description:
Feedback Return Conveyors are available in two models, featuring 24" or 36" wide return rollers. The standard receiving module is 36" wide X 36" or 60" long. The return conveyor length is proportionate to the length of the Shaper / Sander or the Edge Foiler it services. Feed rollers, driven by a d.c. variable speed motor, guide the part onto the receiving module. Polymer belts side shift the panels to the return rollers quickly and efficiently. The transfer process occurs on a continuous basis. Small parts may not feed correctly - specify minimum part sizes.
Feedback-24-3-9
A 36" wide x 3' long receiving module and a
24" wide x 9' long return conveyor. $ 7,915.00
Feedback-24-5-11
A 36" wide x 5' long receiving module and a
24" wide x 11' long return conveyor. $ 8,865.00
Feedback-36-3-9
A 36" wide x 3' long receiving module and a
36" wide x 9' long return conveyor. $ 9,100.00
Feedback-36-5-11
A 36" wide x 5' long receiving module and a
36" wide x 11' long return conveyor. $ 10,030.00
OPTIONAL FEATURE:
Additional return conveyor length, sold by increments of 2 feet: $ 490.00
For Unique Shape and Sand, Model 4522 with squaring table
Add to the Feedback Basic Model, - 10 ft of inclined return
conveyor length including quick release disconnect on caster
mounting (this option includes the 6 feet of additional return
conveyor length required for this Unique Shape& Sand. $ 2, 975.00
Terms: 30% down with order; net 30 days from ship date, with approved credit.
|
|
|
Click for a larger picture
|
|
SCHMALZ - JUMBO ERGO 110 VACUUM LIFT
|
|
Price: $10,925.00
Machine Stock Number: JERGO110-Q
Condition: New
FOB: NC-RALEIGH
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
JUMBO ERGO 110 with 240 lb non-porous lifting capacity complete with:
- Automatically activated valve system to "lock on" to work piece. User-friendly "motorcycle twist-grip" for variable speed control of the system.
- 4.8 HP standard direct drive blower with 110 CFM airflow, 14.7" Hg suction. Electrical requirements 208-230/460V-3PH-60Hz.
- 8.0" diameter lift tube, reinforced with 12 gage wire and PVC material. 68" lifting stroke. Standard adjustable "hovering height" control. Non-return safety valve contains vacuum in case of power failure allowing load to safely descend before release. 360 degree rotation on bearing-mounted top swivel. High gloss gray powder-coat finish.
- Blue nylon protective tube cover (no cost)
- STF2-P4.5 heavy-duty dust filter with replaceable cartridge.
REQUIRED JOB SPECIFIC ACCESSORIES INCLUDED IN PRICE:
- 30 rigid operator handle.
- Double vacuum head DG 110-1200 E/S, 47" beam and 10.6" x 7.1" (270x180) pads.
- 40 ft Suction hose, ID = 50mm (2") gray PVC material.
- Protective motor switch for 230V 3phase motor with 10-16 amp rating.
Leadtime : 2 - 4 weeks
OPTIONAL:
Gorbel WSJ360-250-10-16 freestanding jib crane with 250 lb capacity, 16 ft span, and 10 ft height under boom. Includes festoon trolleys. If crane will be mounted to a 6 inch deep reinforced concrete floor, baseplate must be centered on a 5.5 ft x 5.5 ft area which is
free of cracks, seams and expansion joints. Price: $1,850.00
TERMS:
35% due with order; 35% due prior to shipping; balance net 30 days with approved credit.
WARRANTY:
0 - 18 months: 100% replacement cost covered (fob factory)
19 - 36 months: 50% replacement cost covered (fob factory)
Validated by faxing completed warranty registration
|
|
|
|
|
SCHMALZ - JUMBO ERGO 65 VACUUM LIFT
|
|
Price: $9,695.00
Machine Stock Number: JERGO65-Q
Condition: New
FOB: NC-RALEIGH
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
JUMBO ERGO 65 with 145 lb non-porous lifting capacity complete with:
- Automatically activated valve system to "lock on" to work piece. User-friendly "motorcycle twist-grip" for variable speed control of the system.
- 4.8 HP standard direct drive blower with 110 CFM airflow, 14.7" Hg suction. Electrical requirements 208-230/460V-3PH-60Hz.
- 6.3" diameter lift tube, reinforced with 12 gage wire and PVC material. 70" lifting stroke. Standard adjustable "hovering height" control. Non-return safety valve contains vacuum in case of power failure allowing load to safely descend before release. 360 degree rotation on bearing-mounted top swivel. High gloss gray powder-coat finish.
- Blue nylon protective tube cover (no cost)
- STF2-P4.5 heavy-duty dust filter with replaceable cartridge.
REQUIRED JOB SPECIFIC ACCESSORIES INCLUDED IN PRICE:
- 30 rigid operator handle.
- Double vacuum head DG 85-1200 E/S, 47" beam and 11" x 4" (280x100) pads.
- 40 ft Suction hose, ID = 50mm (2") gray PVC material.
- Protective motor switch for 230V 3phase motor with 10-16 amp rating.
Leadtime : 2 - 4 weeks
OPTIONAL:
Gorbel WSJ360-150-10-16 freestanding jib crane with 150 lb capacity, 16 ft span, and 10 ft height under boom, 360 degree rotation and all necessary hose trolleys. If crane will be mounted to a 6 inch deep reinforced concrete floor, baseplate must be centered on a 4 ft x 4 ft area which is free of cracks, seams and expansion joints. Price: $1,650.00
TERMS:
35% due with order; 35% due prior to shipping; balance net 30 days with approved credit.
WARRANTY:
0 - 18 months: 100% replacement cost covered (fob factory)
19 - 36 months: 50% replacement cost covered (fob factory)
Validated by faxing completed warranty registration
|
|
|
|
|
SCHMALZ - JUMBO ERGO 85 VACUUM LIFT
|
|
Price: $9,825.00
Machine Stock Number: ERGO85-Q
Condition: New
FOB: NC-RALEIGH
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
JUMBO ERGO 85 with 185 lb non-porous lifting capacity complete with:
- Automatically activated valve system to "lock on" to work piece. User-friendly "motorcycle twist-grip" for variable speed control of the system.
- 4.8 HP standard direct drive blower with 110 CFM airflow, 14.7" Hg suction.
- 7.0" diameter lift tube, reinforced with 12 gage wire and PVC material. 69" lifting stroke. Standard adjustable "hovering height" control. Non-return safety valve contains vacuum in case of power failure allowing load to safely descend before release. 360 degree rotation on bearing-mounted top swivel. High gloss gray powder-coat finish.
- Blue nylon protective tube cover
- STF2-P4.5 heavy-duty dust filter with replaceable cartridge.
REQUIRED JOB SPECIFIC ACCESSORIES INCLUDED IN PRICE:
- 30 rigid operator handle.
- Double vacuum head DG 85-1200 E/S, 47" beam and 9.6" x 5.7" (245x145) pads.
- 40 ft Suction hose, ID = 50mm (2") PVC material.
- Protective motor switch for 230V 3phase motor with 10-16 amp rating.
Leadtime : 2 - 4 weeks
OPTIONAL:
Gorbel WSJ360-250-10-16 freestanding jib crane with 250 lb capacity, 16 ft span, and 10 ft height under boom. Includes festoon trolleys. If crane will be mounted to a 6 inch deep reinforced concrete floor, baseplate must be centered on a 5.5 ft x 5.5 ft area which is
free of cracks, seams and expansion joints. Price: $1,850.00
TERMS:
35% due with order; 35% due prior to shipping; balance net 30 days with approved credit.
WARRANTY:
0 - 18 months: 100% replacement cost covered (fob factory)
19 - 36 months: 50% replacement cost covered (fob factory)
Validated by faxing completed warranty registration
|
|
|
|
|
SCHMALZ - JUMBO ERGO 85 VACUUM LIFT
|
|
Price: $9,995.00
Machine Stock Number: ERGO85-108
Condition: New
FOB: ADDISON, TX.
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
JUMBO ERGO 85 with 185 lb non-porous lifting capacity complete with:
- Automatically activated valve system to "lock on" to work piece. User-friendly "motorcycle twist-grip" for variable speed control of the system.
- 4.8 HP standard direct drive blower with 110 CFM airflow, 14.7" Hg suction. UL, CSA, and CE approved.
- 7.0" diameter lift tube, reinforced with 12 gage wire and PVC material. 74" lifting stroke. Standard adjustable "hovering height" control. Non-return safety valve contains vacuum in case of power failure allowing load to safely descend before release. 360 degree rotation on bearing-mounted top swivel. High gloss gray powder-coat finish.
- Blue nylon protective tube cover
- STF2-P4.5 heavy-duty dust filter with replaceable cartridge.
REQUIRED JOB SPECIFIC ACCESSORIES INCLUDED IN PRICE:
- 30 rigid operator handle.
- Double vacuum head DG 85-1200 E/S, 47" beam and 9.6" x 5.7" (245x145) pads.
- 30 ft Suction hose, ID = 50mm (2") PVC material.
- Protective motor switch for 230 volt, 3phase motor with 10-16 amp rating.
*Includes optional suspension harness to hold the head off the floor
- SN: 2083448 New October, 2008.
**SPECIAL PRICING, stock unit above
.. $8,500.00 - this demo unit only!
OPTIONAL:
Gorbel WSJ360-250-10-12 freestanding jib crane with 250 lb capacity, 12 ft span, and 10 ft height under boom. Includes festoon trolleys. If crane will be mounted to a 6 inch deep reinforced concrete floor, baseplate must be centered on a 5.5 ft x 5.5 ft area which is
free of cracks, seams and expansion joints. SN: A81416 Price: $2,515.00
|
|
|
|
|
SOUTHWORTH - LS2-36 HYDRAULIC LIFT TABLE
|
|
Price: $2,995.00
Machine Stock Number: LS2-36-Q
Condition: New
FOB: AR-MANILA
Electrical: 115 V, 1 Ph, 60 Cy
|
|
Description:
Capacity 2,000 lb. uniform load.
Platform 36 x 72 smooth plate with Comfort Edge.
Base Frame 24 x 48 with lag plates and maintenance device.
Lowered Height 6 Ύ
Vertical Travel 36
Raised Height 42 Ύ
Elevating Time approx. 21 seconds.
Lowering Time Adjustable with pressure compensated flow control.
Power Unit Internally mounted with 1.0 HP TENV electric motor, .85 GPM hydraulic pump, valving, and reservoir filled with oil.
Control NEMA 1 footswitch with safety cover. Includes 10 ft of straight cord.
Actuation One 3 ½ low pressure cylinder with chrome plated rod, power
up/gravity down.
Bushings All pivot points equipped with Teflon lined bushings. Leg rollers have
Southworth exclusive wear indicators.
Finish Dark green self-priming machinery enamel with platform painted beige.
Warranty All parts and labor are covered for TWO FULL YEARS
Weight 600 lbs (approx) Freight class #70
Lead time Shipment will be 3-4 weeks
|
|
|
|
|
SOUTHWORTH - LS4-36 HYDRAULIC SCISSORS LIFT
|
|
Price: $3,750.00
Machine Stock Number: LSM4-C107
Condition: New
FOB: ADDISON, TX.
Electrical: 115 V, 1 Ph, 60 Cy
|
|
Description:
Capacity 4,000 lb. uniform load.
Platform 48 x 72 smooth plate with NO Comfort Edge.
Base Frame 24 x 48 with lag plates and maintenance device.
Lowered Height 6 Ύ; Vertical Travel 36; Raised Height 42 Ύ
Elevating Time approx. 42 seconds.
Lowering Time Adjustable with pressure compensated flow control.
Power Unit Internally mounted with 1.0 HP TENV electric motor, .85 GPM hydraulic pump, valving, and reservoir filled with oil.
Control NEMA 1 footswitch with safety cover. Includes 10 ft of straight cord.
Actuation Two 3 ½ Southworth low pressure cylinders with chrome plated rod, power
up/gravity down.
Bushings All pivot points equipped with Teflon lined bushings. Leg rollers have
Southworth exclusive wear indicators.
Weight 650 lbs (approx) Freight class #70
Exclusive wear indicating rollers - Over years of service life maintenance is finally made easy.
Exclusive comfort edge platform - Molded edge on platform is easy on the operator.
Low pressure hydraulic system - Reduces possibility of system leakage and promotes seal life.
Lift cylinder vented to reservoir - No oily mess under lift and no housekeeping problems.
Fully adjustable down speed - Dial in the speed needed for each application change.
Full width-straight through axles - Increases stability and tracking throughout the travel range.
Extra wide base and plate rollers - For increased stability throughout the travel range.
Heavy duty torque tubes - Improves stability under dynamic or eccentric loads.
Pins, rollers and bushings - All bushings are lubricated-for-life.
Heavy duty wire braided hoses - Burst strengths all 400% greater than the operating pressure.
Built-in, hinged safety chocks - Prevents accidental lowering during maintenance
Full profiled scissors legs - Maximum thickness where it is needed - at the main axle pin.
Two year parts and labor warranty - The strongest warranty in the industry!
**One only Demo/like new unit our showroom, terms cash.
|
|
|
|
|
SOUTHWORTH - LS4-36 HYDRAULIC LIFT TABLE
|
|
Price: $3,950.00
Machine Stock Number: LS4-36-Q
Condition: New
FOB: AR-MANILA
Electrical: 115 V, 1 Ph, 60 Cy
|
 |
Description:
Capacity 4,000 lb. uniform load.
Platform 48 x 72 smooth plate with NO Comfort Edge.
Base Frame 24 x 48 with lag plates and maintenance device.
Lowered Height 6 Ύ; Vertical Travel 36; Raised Height 42 Ύ
Elevating Time approx. 42 seconds.
Lowering Time Adjustable with pressure compensated flow control.
Power Unit Internally mounted with 1.0 HP TENV electric motor, .85 GPM hydraulic pump, valving, and reservoir filled with oil.
Control NEMA 1 footswitch with safety cover. Includes 10 ft of straight cord.
Actuation Two 3 ½ Southworth low pressure cylinders with chrome plated rod, power
up/gravity down.
Bushings All pivot points equipped with Teflon lined bushings. Leg rollers have
Southworth exclusive wear indicators.
Weight 650 lbs (approx) Freight class #70
Exclusive wear indicating rollers - Over years of service life maintenance is finally made easy.
Exclusive comfort edge platform - Molded edge on platform is easy on the operator.
Low pressure hydraulic system - Reduces possibility of system leakage and promotes seal life.
Lift cylinder vented to reservoir - No oily mess under lift and no housekeeping problems.
Fully adjustable down speed - Dial in the speed needed for each application change.
Full width-straight through axles - Increases stability and tracking throughout the travel range.
Extra wide base and plate rollers - For increased stability throughout the travel range.
Heavy duty torque tubes - Improves stability under dynamic or eccentric loads.
Pins, rollers and bushings - All bushings are lubricated-for-life.
Heavy duty wire braided hoses - Burst strengths all 400% greater than the operating pressure.
Built-in, hinged safety chocks - Prevents accidental lowering during maintenance
Full profiled scissors legs - Maximum thickness where it is needed - at the main axle pin.
Two year parts and labor warranty - The strongest warranty in the industry!
Shipment: 2- 3 weeks or less
Optional:
Add for 3/60/230 or 460 volt electics $245.00
Add for 48" x 96" platform $195.00
|
|
|
Click for a larger picture
|
|
SOUTHWORTH - LS6-36 HYDRAULIC LIFT TABLE
|
|
Price: $4,650.00
Machine Stock Number: LS6-36-Q
Condition: New
FOB: AR-MANILA
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
Capacity 6,000 lb. uniform load.
Platform 48 x 96 (or 36" x 84") smooth plate with Comfort Edge.
Base Frame 24 x 48 with lag plates and maintenance device.
Lowered Height 7 Ό
Vertical Travel 36
Raised Height 43 Ύ
Elevating Time approx. 22 seconds.
Lowering Time Adjustable with pressure compensated flow control.
Power Unit Internally mounted with 3.2 HP TENV electric motor, 2.8 GPM hydraulic
pump, valving, and reservoir filled with oil.
Primary Voltage 230-460/3/60
Control Voltage 115/1/60
Control NEMA 1 footswitch with safety cover. Includes 10 ft of straight cord.
Control Panel NEMA 1 Control Panel mounted & wired.
Actuation Three 3 ½ low pressure cylinders with chrome plated rod, power
up/gravity down.
Bushings All pivot points equipped with Teflon lined bushings. Leg rollers have
Southworth exclusive wear indicators.
Finish Grey machinery enamel.
Warranty All parts and labor are covered for TWO FULL YEARS
Weight 1100 lbs (approx) Freight class #70
Exclusive wear indicating rollers - Over years of service life maintenance is finally made easy.
Exclusive comfort edge platform - Molded edge on platform is easy on the operator.
Low pressure hydraulic system - Reduces possibility of system leakage and promotes seal life.
Lift cylinder vented to reservoir - No oily mess under lift and no housekeeping problems.
Fully adjustable down speed - Dial in the speed needed for each application change.
Full width-straight through axles - Increases stability and tracking throughout the travel range.
Extra wide base and plate rollers - For increased stability throughout the travel range.
Heavy duty torque tubes - Improves stability under dynamic or eccentric loads.
Pins, rollers and bushings - All bushings are lubricated-for-life.
Heavy duty wire braided hoses - Burst strengths all 400% greater than the operating pressure.
Built-in, hinged safety chocks - Prevents accidental lowering during maintenance
Full profiled scissors legs - Maximum thickness where it is needed - at the main axle pin.
Optional:
Photo Eye Auto-Leveling Package:
Includes adjustable photoelectric sensor and control panel mounted to a stanchion.
Panel includes Index ON/OFF selector switch, Lift UP/DOWN selector switch, and
E-Stop button. An adjustable timer is included to delay (up to 10 seconds) automatic
movement of lift platform. A separate stanchion with reflector is also included.
Customer to specify Index UP or Index DOWN. (accurate for panel thickness of 1/2"
or more) $975.00
Casters 6" x 3": Two swivel and two rigid 6" x 3" texite casters mounted to sides
of base frame for lengthwise traverse. Includes one foot operated floor lock on
one end. Lowered height: 12 1/4" Raised height: 48 1/4" $785.00
Lead time Shipment will be 3-4 weeks from order.
Terms -- 25% down with order, balance net 30 days with approved credit
|
|
|
|
|
|
|
1-10 || 11-15 |
Last Updated: 8/6/2010
|
|
