|
New Equipment: By Type | By Manufacturer
|
|
All Listings >
Category: DIGITAL MEASURING TOOLS
Showing 10 Machines
New Machine Listings
|
|
|
TIGERSTOP - HD2R-XXX PROGRAMABLE STOP
|
|
Price: $22,995.00
Machine Stock Number: HD2R30-60-Q
Condition: New
FOB: WA-VANCOUVER
Electrical: 220 V, 1 Ph, 60 Cy
|
 |
Description:
Working Lengths: 12' up to 108'
Motor Type: 1.5 HP DC servo with optical encoder capable of pushing up to 350 pounds on a flat top table! Also capable of pushing up to 1500 pounds on a roller table, but at lower speeds. Drive Type: Rack & Pinion; Speed: Adjustable up to 225 ft/min. Power Requirements: 220 volt, 1 phase @ 8 amps.
Repeatability: ±0.008”
Display Type: 4 Line High Contrast LCD
Serial Interface: Yes
Number of Programs: 99
Lines of Data: 2000+
Standard Features: Inches and Metric; Set Point Stop Mode;Push Feed Mode Pattern Mode; Increment Function; Programmable 1. Hot Keys or 2. Cut Lists
Upgradable Options: Interlock -1.Standard or -2 Advanced; RS232 Port; Bar Code Reader; TigerOptimizer; Data Downloading; Label Printing; Multi-Languages
Includes control stand, line filter, heavy duty pusher arm. Must specify if the stop moves from right to left or vice versa. On HD2R-36 and longer, price includes Tigerstop service man for setup and training of the Tigerstop unit only, not tables! NOTE: Price does not include airfare and travel expenses, BUT now included FREE for orders place by September 30, 2010 !!
Model HD2R-30, working length 30', net length 33’ <$ 22,995> $19,546.00 ** SALE$
TABR30 14" wide tables with rollers, 32’ long $ 4,780.00
Model HD2R-36, working length 36', net length 39’ $ 27,895.00
TABR36 14" wide tables with rollers, 38’ long $ 5,975.00
Model HD2R-48, working length 48', net length 51’ $ 33,995.00
TABR48 14" wide tables with rollers, 51’ long $ 7,970.00
Model HD2R-60, working length 60', net length 63’ $ 38,795.00
TABR60 14" wide tables with rollers, 62’ long $ 9,560.00
TABW4Extra wide 28" heavy duty tables, 6' lengths, no rollers $ 1,195.00
TABW4RExtra wide 28" heavy duty tables, 6' lengths, with rollers $ 1,250.00
AIK - advanced interlock kit for full automation/safety $ 2,195.00
OPT - TigerOptimizer/Visual Optimizer for XP $ 1,295.00
DNLD Workflow Manager, includes: $ 1,295.00
Work order (cut list management); scheduling; downloading;
batching; materials & type sorting; editing; yield & time reporting;
process control tools for lean & standard manufacturing
VPK2 Bundles - OPT, DNLD and PR2 (2" Printer & $ 3,195.00
communication panel)
ESC Ethernet to serial converter $ 320.00
SX Serial extender $ 320.00
USBA USB to serial converter $ 320.00
TERMS: 50% down with the order; 40% prior to shipping, balance on setup, not to
exceed 30 days from shipping with approved credit.
*** FREE SETUP & TRAINING ON HD2-36 AND LONGER!! Good through 9/30/2010. ***
*** ALSO INCLUDES EXTENDED 2 YEAR WARRANTY - FREE through 9/30/2010 !! ***
WARNING: TigerStop, TigerFence, and TigerCrossCut are machine components intended for use in conjunction with other potentially dangerous machinery. The use of these components does not make that machinery safe. TigerStop LLC’s products are not intended to substitute, in any manner, for safety requirements in general, or in conjunction with other machinery. These components must be incorporated into machinery by persons qualified to design safety features to make the machine as safe as possible and to ensure that it meets federal, state and local law with respect to safety and all other regulatory requirements. In addition, TigerStop, TigerFence, and TigerCrossCut are machine components that should only be operated by qualified persons trained in safe operating procedures. Illustrations of TigerStop, TigerFence, and TigerCrossCut components in use do not show and are not intended to show safety features necessary to make the machinery safe to operate.
|
|
|
Click for a larger picture
|
|
TIGERSTOP - TCC PROGRAMABLE CROSS CUT STOP
|
|
Price: $4,495.00
Machine Stock Number: TCC-Q
Condition: New
FOB: WA-VANCOUVER
Electrical: 120 V, 1 Ph, 60 Cy
|
|
Description:
TigerStop’s TigerCrossCut™ automates existing standard and sliding table saws. The value added to cutting operations by eliminating time spent adjusting rip fences and stops manually can provide 30- 40% more production from the saw with repeatability and accuracy. Users can reduce labor and material waste costs. These new 4th generation products provide repeatability of +/– 0.003” for both ripping and crosscutting operations. TigerStop receives high marks for ease of installation and the ability to rotate the TigerFence out of the way when necessary. TigerCrossCut is the industry’s first field-installable CNC upgrade for a sliding table saw! Designed to replace OEM cross cut fences, TigerCrossCut can handle lengths in excess of 120”. The controller for TigerCrossCut can be mounted right in front of the operator, allowing the sawyer to stay with the material while quickly keying in fractional or decimal dimensions. **NOT intended for angle cutting!** Installation NOT included.
Working Lengths:
TigerCrossCut: 60” (1524 mm) first stop, plus 60” (1524 mm) extension for a total of 120”
Fence Dimensions: 4.25” x 4.25” (108 mm x 108 mm)
Motor Box Dimensions: 5.5” W x 4.25” H x 10.75” L (140 mm W x 108 mm H x 274 mm L)
Power Requirements: 120Vac @ 50/60 Hz @ 4 amps, isolated circuit
Motor Type: DC servo with optical encoder
Drive Type: 3/4” multi-start Hi-Lead® screw drive
Drive Speed: TigerCrossCut: Adjustable 1” ~ 10” / sec, typical 5” / sec
Repeatability: +/- 0.003” (3/1000”) ; +/- 0.08mm
Display Type: 2 line by 16 character high contrast LCD
Serial Interface: RS232C
Number of Saved Programs: Up to 99 different cut lists can be saved and re-used. Total possible cut parts is just under 2 million; 2000 different lengths across 99 cut lists in quantities of 998 for each length. No single cut list can have more than 1000 different lengths.
Standard Features:
•Set point mode
•Pattern mode
•Kerf compensation
•Electronic zero point calibration
•Multi-lingual Input feet, inches, fractions, decimal inches and metric
•Increment function
•May require mount customization depending on saw model type
TCCF-45-A Altendorf F-45 Adapter Kit …… $175.00
TigerStop LLC reserves the right to make specification changes without notice and without obligation to make changes to existing products in the market.
WARNING: TigerStop, TigerFence, and TigerCrossCut are machine components intended for use in conjunction with other potentially dangerous machinery. The use of these components does not make that machinery safe. TigerStop LLC’s products are not intended to substitute, in any manner, for safety requirements in general, or in conjunction with other machinery. These components must be incorporated into machinery by persons qualified to design safety features to make the machine as safe as possible and to ensure that it meets federal, state and local law with respect to safety and all other regulatory requirements. In addition, TigerStop, TigerFence, and TigerCrossCut are machine components that should only be operated by qualified persons trained in safe operating procedures. Illustrations of TigerStop, TigerFence, and TigerCrossCut components in use do not show and are not intended to show safety features necessary to make the machinery safe to operate.
|
|
|
|
|
TIGERSTOP - TF PROGRAMABLE SAW FENCE
|
|
Price: $4,295.00
Machine Stock Number: TF-Q
Condition: New
FOB: WA-VANCOUVER
Electrical: 110 V, 1 Ph, 60 Cy
|
|
Description:
TigerStop’s TigerFence™ automates existing standard and sliding table saws. Replaces your existing fence and mounting bars with a new flip away fence! The value added to cutting operations by eliminating time spent adjusting rip fences and stops manually can provide 30-40% more production from the saw with repeatability and accuracy. Users can reduce labor and material waste costs. These new 4th generation products provide repeatability of +/– 0.003” for both ripping and crosscutting operations. TigerStop receives high marks for ease of installation and the ability to rotate the TigerFence out of the way when necessary.
Working Lengths:
TigerFence: Standard 51” (1295 mm), extended lengths available up to 70” (1778 mm)
Fence Dimensions: 4.25” x 4.25” (108 mm x 108 mm)
Motor Box Dimensions: 5.5” W x 4.25” H x 10.75” L (140 mm W x 108 mm H x 274 mm L)
Power Requirements: 120Vac @ 50/60 Hz @ 15 amps, isolated circuit
Motor Type: DC servo with optical encoder
Drive Type: 3/4” multi-start Hi-Lead® screw drive
Drive Speed: TigerFence: Adjustable 1” ~ 10” / sec, typical 5” / sec
Repeatability: +/- 0.003” (3/1000”) ; +/- 0.08mm
Display Type: 2 line by 16 character high contrast LCD
Serial Interface: RS232C
Number of Saved Programs: Up to 99 different cut lists can be saved and re-used. Total possible cut parts is just under 2 million; 2000 different lengths across 99 cut lists in quantities of 998 for each length. No single cut list can have more than 1000 different lengths.
Standard Features:
•Set point mode
•Pattern mode
•Kerf compensation
•Electronic zero point calibration
•Multi-lingual Input feet, inches, fractions, decimal inches and metric
•Increment function
•May require mount customization depending on saw model type
TigerStop LLC reserves the right to make specification changes without notice and without obligation to make changes to existing products in the market.
WARNING: TigerStop, TigerFence, and TigerCrossCut are machine components intended for use in conjunction with other potentially dangerous machinery. The use of these components does not make that machinery safe. TigerStop LLC’s products are not intended to substitute, in any manner, for safety requirements in general, or in conjunction with other machinery. These components must be incorporated into machinery by persons qualified to design safety features to make the machine as safe as possible and to ensure that it meets federal, state and local law with respect to safety and all other regulatory requirements. In addition, TigerStop, TigerFence, and TigerCrossCut are machine components that should only be operated by qualified persons trained in safe operating procedures. Illustrations of TigerStop, TigerFence, and TigerCrossCut components in use do not show and are not intended to show safety features necessary to make the machinery safe to operate.
|
|
|
|
|
TIGERSTOP - TF-SLR PROGRAMABLE SAW FENCE
|
|
Price: $3,595.00
Machine Stock Number: TF-SLR-38
Condition: New
FOB: ADDISON, TX.
Electrical: 110 V, 1 Ph, 60 Cy
|
 |
Description:
TigerStop’s TigerFence™ Straight Line Rip automates existing rip saw fences. Replaces your existing fence and mounting bars with a new flip away fence! The value added to cutting operations by eliminating time spent adjusting rip fences and stops manually can provide 30-40% more production from the saw with repeatability and accuracy. Users can reduce labor and material waste costs. These new 4th generation products provide repeatability of +/– 0.003”. TigerStop receives high marks for ease of installation.
Working Lengths:
TigerFence: Standard 24” custom lengths available
Fence Dimensions: 4.25” x 4.25” (108 mm x 108 mm)
Motor Box Dimensions: 5.5” W x 4.25” H x 10.75” L (140 mm W x 108 mm H x 274 mm L)
Power Requirements: 120Vac @ 60 Hz @ 15 amps, isolated circuit
Motor Type: DC servo with optical encoder
Drive Type: 3/4” multi-start Hi-Lead® screw drive
Drive Speed: TigerFence: Adjustable 1” ~ 10” / sec, typical 5” / sec
Repeatability: +/- 0.003” (3/1000”) ; +/- 0.08mm
Display Type: 2 line by 16 character high contrast LCD
Serial Interface: RS232C
Number of Saved Programs: Up to 99 different cut lists can be saved and re-used. Total possible cut parts is just under 2 million; 2000 different lengths across 99 cut lists in quantities of 998 for each length. No single cut list can have more than 1000 different lengths.
Standard Features:
•Set point mode
•Pattern mode
•Kerf compensation
•Electronic zero point calibration
•Multi-lingual Input feet, inches, fractions, decimal inches and metric
•Increment function
•May require mount customization depending on saw model type
** Current List Price is $4,795 fob Wash…!
SN: 0814868 ** New Demo model at HST, one only at $3,595.00 !!
TigerStop LLC reserves the right to make specification changes without notice and without obligation to make changes to existing products in the market.
WARNING: TigerStop, TigerFence, and TigerCrossCut are machine components intended for use in conjunction with other potentially dangerous machinery. The use of these components does not make that machinery safe. TigerStop LLC’s products are not intended to substitute, in any manner, for safety requirements in general, or in conjunction with other machinery. These components must be incorporated into machinery by persons qualified to design safety features to make the machine as safe as possible and to ensure that it meets federal, state and local law with respect to safety and all other regulatory requirements. In addition, TigerStop, TigerFence, and TigerCrossCut are machine components that should only be operated by qualified persons trained in safe operating procedures. Illustrations of TigerStop, TigerFence, and TigerCrossCut components in use do not show and are not intended to show safety features necessary to make the machinery safe to operate.
|
|
|
Click for a larger picture
|
|
TIGERSTOP - TIGER 10 PROGRAMABLE STOP
|
|
Price: $11,440.00
Machine Stock Number: TIGER10UCWS-Q
Condition: New
FOB: WA-VANCOUVER
Electrical: 120 V, 1 Ph, 60 Cy
|
|
Description:
With programmable controller to store up to 80 programs of twenty steps each with saw kerf or tool width compensation, programmable increment function, recalibration after blade or tool changes. Simple and intuitive controls feature 10-key calculator in either inch of metric dimensions. Fraction or decimal values can be easily entered at the same time. 1/2 HP, 120 volt (8 amps) motor which can develop up to 90 lbs (120 lbs. with roller conveyor) of thrust for use as pusher. Repeatable positioning accuracy of plus or minus .004". Includes controller, motor, swing away stop, 4" square fence, control stand (straight base), line filter surge protector, standard interconnect switch, and simple to use manual.
Tiger Stop 10' working length with 12' long no roller table outfeed; 10' long no roller table for infeed, plus PF- pusher foot for short measurements, and aluminum angled back fence for optimizing with back rule tape - specify LH or RH.
Includes VPK2 TigerOptimizer Package for XP, with Workflow Manager, which includes:
Work order (cut list management); scheduling; downloading;
batching; materials & type sorting; editing; yield & time reporting;
process control tools for lean & standard manufacturing, 2" wide label printer
& communication panel with Communication hardware of your choice -
ESC - Ethernet to serial converter; or SX - Serial extender; or USBA USB to serial converter
***SPECIAL PACKAGE PRICE ……….. $10,440.00 ! OR
WITHOUT VPK2 Optimizing package $ 7,925.00
Terms: 25% down with order; balance net 30, with approved credit.
Shipment: normally 2-3 weeks
WARNING: TigerStop, TigerFence, and TigerCrossCut are machine components intended for use in conjunction with other potentially dangerous machinery. The use of these components does not make that machinery safe. TigerStop LLC’s products are not intended to substitute, in any manner, for safety requirements in general, or in conjunction with other machinery. These components must be incorporated into machinery by persons qualified to design safety features to make the machine as safe as possible and to ensure that it meets federal, state and local law with respect to safety and all other regulatory requirements. In addition, TigerStop, TigerFence, and TigerCrossCut are machine components that should only be operated by qualified persons trained in safe operating procedures. Illustrations of TigerStop, TigerFence, and TigerCrossCut components in use do not show and are not intended to show safety features necessary to make the machinery safe to operate.
|
|
|
|
|
TIGERSTOP - TIGER 16 - 30 PROGRAMABLE STOP
|
|
Price: $8,195.00
Machine Stock Number: TIGERTS16-30-Q
Condition: New
FOB: WA-VANCOUVER
Electrical: 120 V, 1 Ph, 60 Cy
|
 |
Description:
With programmable controller to store up to 80 programs of twenty steps each with saw kerf or tool width compensation, programmable increment function, recalibration after blade or tool changes. Simple and intuitive controls feature 10-key calculator in either inch of metric dimensions. Fraction or decimal values can be easily entered at the same time. 1/2 HP, 120 volt (8 amps) motor which can develop up to 90 lbs (120 lbs. with roller conveyor) of thrust for use as pusher. Repeatable positioning accuracy of plus or minus .004". Includes controller, motor, swing away stop, 4" square fence, control stand (straight base), line filter surge protector, standard interconnect switch, and simple to use manual.
Tiger Stop TS16 - 16' working length $ 8,195.00
TABNR16 - 18' long table no rollers $ 1,940.00
TBR16 - 18' long table w/18 steel rollers $ 2,790.00
Tiger Stop TS20 - 20' working length $ 9,795.00
TABNR20 - 22' long table no rollers $ 2,240.00
TABR20 - 22' long table w/22 steel rollers $ 3,390.00
Tiger Stop TS24 - 24' working length $11,595.00
TABNR24 - 26' long table no rollers $ 2,835.00
TABR24 - 26' long table w/26 steel rollers $ 3,985.00
Tiger Stop TS30 - 30' working length $14,595.00
TABNR30 - 32' long table no rollers $ 3,530.00
TABR30 - 32' long table w/32 steel rollers $ 4,780.00
AIK - advanced interlock kit for full
automation/push cutting $2,195.00
SS24 - 24" Saw support and 2 leg sets, CTD 255 $1,395.00
TABLEG Table leg set, standard $ 375.00
PF - pusher foot for short measurements $ 135.00
PFX - extended arm pusher foot $ 375.00
GSX - gang stop $ 375.00
TB - Tilt base set to tilt saw to 10 degrees $ 445.00
MG - miter gauge for miter saw $ 315.00
SAP - saw attachment plate for mounting end
of table to saw $ 99.00
BF - alum. angled back fence for infeed - 6' sec $ 99.00/sec.
BRL or R - back rule tape - specify LH or RH $ 60.00
SET - TigerSet Interface, connection to PC only $ 525.00
OPT TigerOptimizer/Visual Optimizer for XP $1,295.00
DNLD Workflow Manager, includes: $1,295.00
Work order (cut list management); scheduling; downloading;
batching; materials & type sorting; editing; yield & time reporting;
process control tools for lean & standard manufacturing
VPK2 Bundles - OPT, DNLD and PR2 (2" printer
& communication panel) $3,195.00
ESC Ethernet to serial converter $ 320.00
SX Serial extender $ 320.00
USBA USB to serial converter $ 320.00
Terms: 25% down with order; balance net 30, with approved credit.
Shipment: normally 2-3 weeks.
WARNING: TigerStop, TigerFence, and TigerCrossCut are machine components intended for use in conjunction with other potentially dangerous machinery. The use of these components does not make that machinery safe. TigerStop LLC’s products are not intended to substitute, in any manner, for safety requirements in general, or in conjunction with other machinery. These components must be incorporated into machinery by persons qualified to design safety features to make the machine as safe as possible and to ensure that it meets federal, state and local law with respect to safety and all other regulatory requirements. In addition, TigerStop, TigerFence, and TigerCrossCut are machine components that should only be operated by qualified persons trained in safe operating procedures. Illustrations of TigerStop, TigerFence, and TigerCrossCut components in use do not show and are not intended to show safety features necessary to make the machinery safe to operate.
|
|
|
Click for a larger picture
|
|
TIGERSTOP - TIGER 6 - 12 PROGRAMABLE STOP
|
|
Price: $4,795.00
Machine Stock Number: TIGER6-12-Q
Condition: New
FOB: WA-VANCOUVER
Electrical: 120 V, 1 Ph, 60 Cy
|
 |
Description:
With programmable controller to store up to 80 programs of twenty steps each with saw kerf or tool width compensation, programmable increment function, recalibration after blade or tool changes. Simple and intuitive controls feature 10-key calculator in either inch of metric dimensions. Fraction or decimal values can be easily entered at the same time. 1/2 HP, 120 volt (8 amps) motor which can develop up to 90 lbs (120 lbs. with roller conveyor) of thrust for use as pusher. Repeatable positioning accuracy of plus or minus .004". Includes controller, motor, swing away stop, 4" square fence, control stand (straight base), line filter surge protector, standard interconnect switch, and simple to use manual.
TS06 Tiger Stop -6' working length $ 4,795.00
TABNR06- 8' long table no rollers $ 895.00
TABR06- 8' long table w/8 rollers $ 1,195.00
Tiger Stop TS08- 8' working length $ 4,995.00
TABNR08-10' long table no rollers $ 1,045.00
TABR08- 10' long table w/ 10 steel rollers $ 1,595.00
Tiger Stop TS10- 10' working length $ 5,095.00
TABNR10- 12' long table no rollers $ 1,195.00
TABR10- 12' long table w/12 steel rollers $ 1,795.00
Tiger Stop TS12- 12' working length $ 6,295.00
TABNR12- 14' long table no rollers $ 1,690.00
TABR12- 14' long table w/ 14 steel rollers $ 2,190.00
**Longer lengths available! Request quote for 16' to 30' lengths or heavy duty versions!!
*TigerStop tables include mounting brackets to mount the Tigerstop! If you use other tables please select BR3X3 mounting brackets. $ 50.00 ea.
AIK - advanced interlock kit for full
automation push cutting $2,195.00
SS24 - 24" Saw support and 2 leg sets, CTD 255 $1,395.00
TABLEG Table leg set, standard $ 375.00
PF- pusher foot for short measurements $ 135.00
PFX - extended arm pusher foot $ 375.00
GSX- gang stop $ 375.00
TB - Tilt base set to tilt saw to 10 degrees $ 445.00
MG - miter gauge for miter saw $ 315.00
SAP- saw attachment plate for mounting
end of table to saw $ 99.00
BF- Alum. angled back fence for optimizing - 6' $ 99.00/sec.
BRL or R - back rule tape - specify LH or RH $ 60.00
SET - TigerSet Interface, connection to PC only $ 525.00
OPT TigerOptimizer/Visual Optimizer for XP $1,295.00
DNLD Workflow Manager, includes: $1,295.00
Work order (cut list management); scheduling; downloading;
batching; materials & type sorting; editing; yield & time reporting;
process control tools for lean & standard manufacturing
VPK2 Bundles - OPT, DNLD and PR2 (2" printer
& communication panel) $3,195.00
ESC Ethernet to serial converter $ 320.00
SX Serial extender $ 320.00
USBA USB to serial converter $ 320.00
Terms: 25% down with order; balance net 30, with approved credit.
Shipment: normally 2-3 weeks
WARNING: TigerStop, TigerFence, and TigerCrossCut are machine components intended for use in conjunction with other potentially dangerous machinery. The use of these components does not make that machinery safe. TigerStop LLC’s products are not intended to substitute, in any manner, for safety requirements in general, or in conjunction with other machinery. These components must be incorporated into machinery by persons qualified to design safety features to make the machine as safe as possible and to ensure that it meets federal, state and local law with respect to safety and all other regulatory requirements. In addition, TigerStop, TigerFence, and TigerCrossCut are machine components that should only be operated by qualified persons trained in safe operating procedures. Illustrations of TigerStop, TigerFence, and TigerCrossCut components in use do not show and are not intended to show safety features necessary to make the machinery safe to operate.
|
|
|
Click for a larger picture
|
|
TIGERSTOP - TIGER 8-16NF PROGRAMABLE STOP
|
|
Price: $4,995.00
Machine Stock Number: TIGER8-16NF-Q
Condition: New
FOB: WA-VANCOUVER
Electrical: 120 V, 1 Ph, 60 Cy
|
|
Description:
With programmable controller to store up to 80 programs of twenty steps each with saw kerf or tool width compensation, programmable increment function, recalibration after blade or tool changes. Simple and intuitive controls feature 10-key calculator in either inch of metric dimensions. Fraction or decimal values can be easily entered at the same time. 1/2 HP, 120 volt (8 amps) motor which can develop up to 90 lbs (120 lbs. with roller conveyor) of thrust for use as pusher. Repeatable positioning accuracy of plus or minus .004". Includes controller, motor, swing away stop, 4" square fence, control stand (straight base), line filter surge protector, standard interconnect switch, and simple to use manual.
Tiger Stop TS08- 8' working length $ 4,995.00
TABR08- 10' long table w/ 10 steel rollers $ 1,595.00
TABR08PR-10' long table, plastic rollers $ 1,595.00
Tiger Stop TS10- 10' working length $ 5,095.00
TABR10- 12' long table w/12 steel rollers $ 1,795.00
TABR10PR- 12' long table, plastic rollers $ 1,795.00
Tiger Stop TS12- 12' working length $ 6,295.00
TABR12- 14' long table w/ 14 steel rollers $ 2,190.00
TABR12PR- 14' long table, plastic rollers $ 2,190.00
Tiger Stop TS16- 16' working length $ 8,195.00
TABR16- 18' long table w/ 14 steel rollers $ 2,790.00
TABR16PR- 18' long table, plastic rollers $ 2,790.00
TABLEG Table leg, extra/independent support $ 375.00 ea.
**Longer lengths available! Request quote for 16' to 30' lengths or heavy duty versions!!
*TigerStop tables include mounting brackets to mount the Tigerstop! If you use other tables please select BR3X3 mounting brackets. $ 50.00 ea.
Move motor end from saw to home (opposite end) for cleaner maintenance;
IOC6-X - 20' cable extension for SIK/AIK, 6 pin $ 100.00
CC5-20 - 20' Controller cable $ 45.00
CON5CVR - Controller plastic cover $ 55.00
AIK - advanced interlock kit for full
automation/push cutting $2,195.00
SS24 - 24" Saw support and 2 leg sets, CTD 255 $1,395.00
TABLEG Table leg set, standard $ 375.00
PF- pusher foot for short measurements $ 135.00
PFX - extended arm pusher foot $ 375.00
GSX- gang stop $ 375.00
TB - Tilt base set to tilt saw to 10 degrees $ 445.00
MG - miter gauge for single miter saw $ 315.00
PM - Pusher miter for front fence double miter saw $ 795.00
BF- Alum. angled back fence for infeed - 6' sec. $ 99.00/
SET - TigerSet Interface, connection to PC only $ 525.00
OPT TigerOptimizer/Visual Optimizer for XP $1,295.00
DNLD Workflow Manager, includes: $1,295.00
Work order (cut list management); scheduling; downloading;
batching; materials & type sorting; editing; yield & time reporting;
process control tools for lean & standard manufacturing
VPK2 Bundles - OPT, DNLD and PR2 (2" printer
& communication panel) $3,195.00
ESC Ethernet to serial converter $ 320.00
SX Serial extender $ 320.00
USBA USB to serial converter $ 320.00
Terms: 25% down with order; balance net 30, with approved credit.
Shipment: normally 2-3 weeks
WARNING: TigerStop, TigerFence, and TigerCrossCut are machine components intended for use in conjunction with other potentially dangerous machinery. The use of these components does not make that machinery safe. TigerStop LLC’s products are not intended to substitute, in any manner, for safety requirements in general, or in conjunction with other machinery. These components must be incorporated into machinery by persons qualified to design safety features to make the machine as safe as possible and to ensure that it meets federal, state and local law with respect to safety and all other regulatory requirements. In addition, TigerStop, TigerFence, and TigerCrossCut are machine components that should only be operated by qualified persons trained in safe operating procedures. Illustrations of TigerStop, TigerFence, and TigerCrossCut components in use do not show and are not intended to show safety features necessary to make the machinery safe to operate.
|
|
|
|
|
TIGERSTOP - TIGERPRO 8' PROGRAMABLE STOP
|
|
Price: $2,995.00
Machine Stock Number: TPP08-Q
Condition: New
FOB: WA-VANCOUVER
Electrical: 110 V, 1 Ph, 60 Cy
|
|
Description:
**NEW!! A controller capable of storing up to 10 programs of 10 steps each with programmable Hot Keys, recalibration after blade or tool changes, toggle between Inches or Metric, and easily toggle between English, Spanish, or French. Simple and intuitive controls. Feet, Inches, Fractions or decimal values can be easily entered at the same time. Repeatable positioning accuracy of plus or minus .008". Includes controller, motor, swing away stop, fence, control stand, mounting brackets, and simple to use manual. See factory literature for more details.
TigerPro TPP08- 8' working length $2,995.00
TigerPro 08 Extra extrusion ready to run! With
Flip up/down stop and mounting brackets $1,495.00
TigerPro Leg Stand $ 175.00
TigerPro Saw Stand Bracket Kit $ 200.00
TABNR08-10' long table no rollers $1,045.00
TABR08- 10' long table w/ 10 steel rollers $1,595.00
SS24 - 24" Saw support and 2 leg sets, CTD 255 $1,395.00
WARNING: TigerStop, TigerPro, TigerFence, and TigerCrossCut are machine components intended for use in conjunction with other potentially dangerous machinery. The use of these components does not make that machinery safe. TigerStop LLC’s products are not intended to substitute, in any manner, for safety requirements in general, or in conjunction with other machinery. These components must be incorporated into machinery by persons qualified to design safety features to make the machine as safe as possible and to ensure that it meets federal, state and local law with respect to safety and all other regulatory requirements. In addition, TigerStop, TigerFence, and TigerCrossCut are machine components that should only be operated by qualified persons trained in safe operating procedures. Illustrations of TigerStop, TigerFence, and TigerCrossCut components in use do not show and are not intended to show safety features necessary to make the machinery safe to operate.
|
|
|
|
|
TIGERSTOP - TIGERTURBO PROGRAMABLE STOP
|
|
Price: $14,195.00
Machine Stock Number: TT-Q
Condition: New
FOB: WA-VANCOUVER
Electrical: 220 V, 1 Ph, 60 Cy
|
|
Description:
Working Lengths: 12' to 42'
Motor Type: 1.5 HP DC servo with optical encoder capable of pushing up to 250 pounds on a flat top table. Also capable of pushing up to 600 pounds on a roller table. Drive Type: 75 mm steel reinforced belt drive. Speed: Adjustable up to 375 ft/min.
Power Requirements: 220v @ 8 amps
Repeatability: ±0.008”
Display Type: 4 Line High Contrast LCD
Number of Programs: 99
Standard Features: Inches and Metric; Set Point Stop Mode;Push Feed Mode Pattern Mode; Increment Function; Programmable 1. Hot Keys or 2. Cut Lists
Upgradable Options: Interlock -1.Standard or -2 Advanced; RS232 Port; Bar Code Reader; TigerOptimizer; Data Downloading; Label Printing; Multi-Languages
Includes control stand, line filter, heavy duty pusher arm. MUST specify if the stop moves from right to left or vice versa.
Model TT018, working length 18', net length 21’ <$14,195> $12,000.00 ** Sale $!
TABR20 14" wide tables with rollers, 22’ long $ 3,390.00
Model TT021, working length 21', net length 24’ <$15,295> $13,000.00 ** Sale $!
TABR22 14" wide tables with rollers, 24’ long $ 3,985.00
Model TT024, working length 24', net length 27’ <$16,495> $14,000.00 ** Sale $!
TABR24 14" wide tables with rollers, 26’ long $ 3,985.00
Model TT030, working length 30', net length 33’ <$18,995> $16,000.00** Sale $!
TABR30 14" wide tables with rollers, 32’ long $ 4,780.00
Model TT042, working length 42', net length 45’ *$26,795.00
TABR42 14" wide tables with rollers, 44’ long $ 6,970.00
*Requires factory tech BUT, less direct travel expenses, billed separate/actual - BUT!
Through September 30, 2010 FREE total cost - no exenses for travel !!
TABW4 Extra wide 28" heavy duty tables, 6' lengths, no rollers $ 1,195.00
TABW4RExtra wide 28" heavy duty tables, 6' lengths, with rollers $ 1,250.00
OPT - TigerOptimizer/Visual Optimizer for XP $ 1,295.00
DNLD Workflow Manager, includes: $ 1,295.00
Work order (cut list management); scheduling; downloading;
batching; materials & type sorting; editing; yield & time reporting;
process control tools for lean & standard manufacturing
VPK2 Bundles - OPT, DNLD and PR2 (2" Printer & $ 3,195.00
communication panel)
ESC Ethernet to serial converter $ 320.00
SX Serial extender $ 320.00
USBA USB to serial converter $ 320.00
AIK - advanced interlock kit for full automation/push cut $ 2,195.00
TERMS: 50% down with the order; 40% prior to shipping, balance on setup, not to
exceed 30 days from shipping with approved credit.
*** FREE SETUP & TRAINING ON TT-36 AND TT42 !! Good through 9/30/2010. ***
*** ALSO INCLUDES EXTENDED 2 YEAR WARRANTY - FREE through 9/30/2010 !! ***
WARNING: TigerStop, TigerFence, and TigerCrossCut are machine components intended for use in conjunction with other potentially dangerous machinery. The use of these components does not make that machinery safe. TigerStop LLC’s products are not intended to substitute, in any manner, for safety requirements in general, or in conjunction with other machinery. These components must be incorporated into machinery by persons qualified to design safety features to make the machine as safe as possible and to ensure that it meets federal, state and local law with respect to safety and all other regulatory requirements. In addition, TigerStop, TigerFence, and TigerCrossCut are machine components that should only be operated by qualified persons trained in safe operating procedures. Illustrations of TigerStop, TigerFence, and TigerCrossCut components in use do not show and are not intended to show safety features necessary to make the machinery safe to operate.
|
|
|
|
|
|
|
Showing 10 Machines |
Last Updated: 8/6/2010
|
|
