|
New Equipment: By Type | By Manufacturer
|
|
All Listings >
Category: BORING MISC. - HORIZONTAL
1-10 || 11-12
New Machine Listings
|
|
|
J & P MACHINES - 4 RSD DOUBLE END BORING MACHINE
|
|
Price: $65,000.00
Machine Stock Number: 4RSD-Q
Condition: New
FOB: CANADA-TORONTO
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
The Model 4 RSD pocket hole grooving and boring machine is ideal for making frames in kitchen, furniture and similar industries. The loading hopper magazine holds 25 pieces of 3/4" thick material. This machine operates automatically by feeding, stopping, clamping, grooving and boring the material in one continuous operation. Produces approximately 10 - 15 pieces per minute; 90 psi air required; Dust collector hoods; Weight approx. 2000 lbs.
Machine Specification:
4 Heads, Linear Bearings Are In All 4 Heads
4 Boring motors 6,000 RPM (220-440 V, 3 Phase, 1/2 HP) with Frequency Inverter
4 High-Frequency Routers 18,000 RPM (220-440 V, 3 Phase, 2.5 HP) with Frequency Inverter
Hopper Magazine 20” High And 7” Wide
Digital Mechanical Indicators for Fast And Accurate Setup.
Linear Bearings In The Moveable Opening And Closing Side Of The Machine.
Minimum part length: 8” Maximum part length: 48” or specified
Minimum part width: 1.5” Maximum part width: 7”
Material thickness ¾” – 7/8”
Machine sizes 40”W x 100”L x 60”H (approximately)
Safety guarding according to Category 1 CSA standards
Cycle time approximately 15 pieces a minute
Totalize parts counter with Reset
Optional:
Return Conveyor: $ 6,000.00
Terms: 40% deposit; 50% before delivery; 10% net 30 days
Shipment: Approx. 5-6 weeks from deposit
*Pricing is in Canadian dollars
|
|
|
Click for a larger picture
|
|
RITTER - R-164 HORIZONTAL STILE BORER
|
|
Price: $46,500.00
Machine Stock Number: R164TS-Q
Condition: New
FOB: CA-ANTIOCH
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
For stile and rail interior and entry doors with the following standard features:
* 12' infeed table & TigerStop Out Feed Programmable
Stop System With 12' Outfeed Table
* four spindle, 7/16-14 right hand threaded
* 2 1/4" fixed centers between spindles
* digital spindle height display
* 3/4" diameter drill capacity
*drill guide busing fence (specify drill diameter)
* 3" maximum depth hole with drill bushings
* individually operated drill heads
* spindle selector switching
* 5 HP 3 phase 230/460 volt TEFC motor
* magnetic controls
* multi cogged-belt drive system
* (2) 3" x 1 1/2" holddown cylinders
* 20" x 42" table surface
* 1 1/4" table adjustment
* right and left hand end boring stops for rails
Terms: 50% down with order, Balance Net 30 days with approved credit!
|
|
|
Click for a larger picture
|
|
RITTER - R-200T FACE FRAME DRILL
|
|
Price: $3,295.00
Machine Stock Number: R200T-Q
Condition: New
FOB: CA-ANTIOCH
Electrical: 110 V, 1 Ph, 60 Cy
|
|
Description:
Single spindle with 1.5 HP 1 phase 110 volt belt driven TEFC motor, manual push button controls actuated by pneumatic foot pedal. Equipped with 24" x 30" table, 24" adjustable backfence with (2) adjustable stops, adjustable hold-down clamp, adjustable boring head stroke, drill guide bushing block for precision counterbore location, and chipbreaker. Tooling included. 562 lbs.
Terms: 50% down with order, Balance Net 30 days with approved credit!
|
|
|
|
|
RITTER - R-800 2 SPINDLE HORIZONTAL BORER
|
|
Price: $8,695.00
Machine Stock Number: R802.3-Q
Condition: New
FOB: CA-ANTIOCH
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
Designed to provide accurate horizontal boring for all types of doweled, counter boring and countersinking applications. Ideal for interior and exterior stile and rail hardwood doors! The machine is equipped with adjustable spindle centers, end boring fences, and a constant pass-line table height to allow for the use of extended material stop gages as well as computerized material stop systems.
STANDARD FEATURES: R802
• 2 horizontal belt driven spindles
• Adjustable drill spindle centers, 2" to 10", and height 0 - 4"; 3/4" bit capacity
RH rotation, 7/16" - 14 threaded chucks
• (2) 1 HP Spindle drive motors
• Fixed work table height
• 12" x 24" work table area
• (2) material positioning fences
• Right angle Tee fence set for end drilling
• 4" boring head stroke
• (2) 2" bore hold down cylinders
• Foot actuated boring cycle
• Machine weight: 1042 lbs
Optional:
Add for TigerStop 10' digital guaging system with flat table
and extra leg support, plus PF pusher foot…………………………… $6,795.00 fob WA.
|
|
|
Click for a larger picture
|
|
RITTER - R813 HORIZONTAL BORING MACHINE
|
|
Price: $8,995.00
Machine Stock Number: R813-Q
Condition: New
FOB: CA-ANTIOCH
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
With a 3 HP motor, TEFC, with magnetic controls and cogged timing belt drive to a thirteen (13) spindle gear driven head. Spindles on 2" centers. The stroke is adjustable air operated from 0" to 3" maximum. Filter, regulator, and lubricator are included. Features a 20" x 42" steel table and four adjustable pneumatic hold-down clamps. Machine cycle initiation is via guarded foot treadle switch. 950 lbs.
Optional: 3 HP 1-phase 220 volt motor, add $625.00
Terms: 50% down with order, Balance Net 30 days with approved credit!
|
|
|
Click for a larger picture
|
|
RITTER - R-853 HORIZONTAL BORING MACHINE
|
|
Price: $8,995.00
Machine Stock Number: R853-Q
Condition: New
FOB: ANTIOCH-CA
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
Designed to provide fast and accurate horizontal and vertical boring for drawer boxes. The machine is equipped with a universal clamping system requiring no set-up change from horizontal to vertical boring.
STANDARD FEATURES:
13-horizontal spindles on 32 mm centers
16" drawer box height capacity
3/8" - 3/4" drawer side thickness
Unlimited drawer box width
Hardened steel helical gears
2 HP Spindle drive motor
Fixed work table height
12" x 24" work table area
Universal material clamp system
2" boring head stroke
Foot actuated boring cycle
Machine weight: 1077 lbs
Optional:
E55-!.5 HP 1 phase motor, 220 volt $295.00
Terms: 50% down with order, Balance Net 30 days with approved credit!
|
|
|
Click for a larger picture
|
|
SICOTTE - AIRBOR 750 HORIZONTAL MULTI BORER
|
|
Price: $23,995.00
Machine Stock Number: 7506-Q
Condition: New
FOB: CANADA-TORONTO
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
With 8" x 72" long steel table with a 6" adjustable single stroke, an air/oil feed, air operated control, (2) two adjustable air operated holddowns, a moving spindle beam, a foot control switch and plastic guard. Three drive groups each to include a 1 HP motor with adjustable bracket, pulley with belt, manual starter with overload protection and wiring. Includes six 2" diameter spindles with 1/2" capacity jacobs chucks. One adjustable squaring fence, 12" long installed on the table.
Optional:
Additional holddowns, complete with
Mounting bracket and hose $945.00 ea.
Special drive motors, 2 HP, 3 phase $250.00 ea.
Terms: 30% down, balance net with approved credit.
|
|
|
Click for a larger picture
|
|
SICOTTE - AIRBOR 750 HORIZONTAL MULTI BORER
|
|
Price: $16,200.00
Machine Stock Number: 7503-Q
Condition: New
FOB: CANADA-TORONTO
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
With 8" x 36" long steel table, 6" adjustable single stroke, an air/oil feed, air operated control, (2) two adjustable air operated holddowns, a moving dovetail spindle beam, a foot valve and plastic guard. Two drive groups each to include a 1 HP motor with adjustable bracket, pulley with belt, manual starter with overload protection and wiring, and two 2" diameter spindles with 1/2"capcity jacob chuck for each motor - total of 4 spindles. One adjustable squaring fence, 12" long installed on the table.
Optional:
Additional holddowns, complete with
Mounting bracking and hose $945.00 ea.
Special drive motors, 2 HP, 3 phase $250.00 ea.
Terms: 30% down, balance net 30 with approved credit.
|
|
|
Click for a larger picture
|
|
SICOTTE - J20 HORIZONTAL MULTI BORER
|
|
Price: $43,670.00
Machine Stock Number: J20-Q
Condition: New
FOB: CANADA-TORONTO
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
With a 96" long by 12" wide adjustable steel table, includes four air operated holddowns with locator stops, hydraulic unit for moving the spindle carriage back and forth. The horizontal stroke and feed speed of the carriage are both adjustable and can be set for either manual, single stroke or continuous stroke operation. Table is adjustable up to 2-1/2" in height. Includes electrical control system, dovetail beam, and plastic guard. Machine to be equipped with eight 2" dia. Heavy duty spindles with 1/2" capacity spring collets, powered by four, 2 HP drive groups with two arms each so that one motor drives two spindles.
Optional:
Add for additional 2" dia. Spindles only $ 705.00 ea.
Add for additional 2 HP drive group for 2 spindles with 2 arms $2,105.00
Terms: 30% down, balance net with approved credit.
|
|
|
Click for a larger picture
|
|
SICOTTE - T1050 HORIZONTAL BORING MACHINE
|
|
Price: $8,495.00
Machine Stock Number: T1050-Q
Condition: New
FOB: CANADA-TORONTO
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
With 12" w. X 16" l. Hardwo0d table with a 2 spindle carriage having 4" horizontal travel, 2 - 1 1/2" diameter spindles with 1/2" spring collets. A 1 HP drive group, air/oil feed, air-operated control, foot control, and plastic guard.
Optional:
Add for 2" diameter spindles $ 90.00 ea.
Special drive motors, 2 HP, 3 phase $250.00
** Terms: 30% down, balance net with approved credit.
|
|
|
Click for a larger picture
|
|
UNIQUE - 71 DRILL TUB
|
|
Price: $4,095.00
Machine Stock Number: 71-Q
Condition: New
FOB: AZ-PHOENIX
Electrical: 115 V, 1 Ph, 60 Cy
|
 |
Description:
Single spindle with 1.5 HP belt driven motor. Equipped with 23" x 40" table, 24" adjustable backfence with (2) adjustable stops, adjustable holddown clamp from bottom; adjustable boring head stroke, Thomson guide shafts; drill guide bushing block for precision counterbore location, and chipbreaker. Palm switch for machine activation. 515 lbs. (less tooling)
|
|
|
Click for a larger picture
|
|
|
|
1-10 || 11-12 |
Last Updated: 8/6/2010
|
|
