New Woodworking Machinery and Equipment by Howard S. Twichell Co.

HOME NEWS USED MACHINERY NEW MACHINERY ABOUT US CONTACT US By Type By Manufacturer By Keywords By Type By Manufacturer By Keywords Location

New Equipment: By Type | By Manufacturer

All Listings >

Brand: SOUTHWORTH
Showing 7 Machines

New Machine Listings

SOUTHWORTH - LS2-36 HYDRAULIC LIFT TABLE

Price: $2,995.00
Machine Stock Number: LS2-36-Q
Condition: New
FOB: AR-MANILA
Electrical: 115 V, 1 Ph, 60 Cy

Description:
Capacity – 2,000 lb. uniform load.
Platform – 36” x 72” smooth plate with Comfort Edge.
Base Frame – 24” x 48” with lag plates and maintenance device.
Lowered Height – 6 ¾”
Vertical Travel – 36”
Raised Height – 42 ¾”
Elevating Time – approx. 21 seconds.
Lowering Time – Adjustable with pressure compensated flow control.
Power Unit – Internally mounted with 1.0 HP TENV electric motor, .85 GPM hydraulic pump, valving, and reservoir filled with oil.
Control – NEMA 1 footswitch with safety cover. Includes 10 ft of straight cord.
Actuation – One 3 ½” low pressure cylinder with chrome plated rod, power
up/gravity down.
Bushings – All pivot points equipped with Teflon lined bushings. Leg rollers have
Southworth exclusive wear indicators.
Finish – Dark green self-priming machinery enamel with platform painted beige.
Warranty – All parts and labor are covered for TWO FULL YEARS
Weight – 600 lbs (approx) – Freight class #70

Lead time – Shipment will be 3-4 weeks

SOUTHWORTH - LS4-36 HYDRAULIC SCISSORS LIFT

Price: $3,750.00
Machine Stock Number: LSM4-C107
Condition: New
FOB: ADDISON, TX.
Electrical: 115 V, 1 Ph, 60 Cy

Description:
Capacity – 4,000 lb. uniform load.
Platform – 48” x 72” smooth plate with NO Comfort Edge.
Base Frame – 24” x 48” with lag plates and maintenance device.
Lowered Height – 6 ¾”; Vertical Travel – 36”; Raised Height – 42 ¾”
Elevating Time – approx. 42 seconds.
Lowering Time – Adjustable with pressure compensated flow control.
Power Unit – Internally mounted with 1.0 HP TENV electric motor, .85 GPM hydraulic pump, valving, and reservoir filled with oil.
Control – NEMA 1 footswitch with safety cover. Includes 10 ft of straight cord.
Actuation – Two 3 ½” Southworth low pressure cylinders with chrome plated rod, power
up/gravity down.
Bushings – All pivot points equipped with Teflon lined bushings. Leg rollers have
Southworth exclusive wear indicators.
Weight – 650 lbs (approx) – Freight class #70

Exclusive wear indicating rollers - Over years of service life maintenance is finally made easy.
Exclusive comfort edge platform - Molded edge on platform is easy on the operator.
Low pressure hydraulic system - Reduces possibility of system leakage and promotes seal life.
Lift cylinder vented to reservoir - No oily mess under lift and no housekeeping problems.
Fully adjustable down speed - “Dial in” the speed needed for each application change.
Full width-straight through axles - Increases stability and tracking throughout the travel range.
Extra wide base and plate rollers - For increased stability throughout the travel range.
Heavy duty torque tubes - Improves stability under dynamic or eccentric loads.
Pins, rollers and bushings - All bushings are lubricated-for-life.
Heavy duty wire braided hoses - Burst strengths all 400% greater than the operating pressure.
Built-in, hinged safety chocks - Prevents accidental lowering during maintenance
Full profiled scissors legs - Maximum thickness where it is needed - at the main axle pin.
Two year parts and labor warranty - The strongest warranty in the industry!

**One only Demo/like new unit our showroom, terms cash.

SOUTHWORTH - LS4-36 HYDRAULIC LIFT TABLE

Price: $3,950.00
Machine Stock Number: LS4-36-Q
Condition: New
FOB: AR-MANILA
Electrical: 115 V, 1 Ph, 60 Cy

Description:
Capacity – 4,000 lb. uniform load.
Platform – 48” x 72” smooth plate with NO Comfort Edge.
Base Frame – 24” x 48” with lag plates and maintenance device.
Lowered Height – 6 ¾”; Vertical Travel – 36”; Raised Height – 42 ¾”
Elevating Time – approx. 42 seconds.
Lowering Time – Adjustable with pressure compensated flow control.
Power Unit – Internally mounted with 1.0 HP TENV electric motor, .85 GPM hydraulic pump, valving, and reservoir filled with oil.
Control – NEMA 1 footswitch with safety cover. Includes 10 ft of straight cord.
Actuation – Two 3 ½” Southworth low pressure cylinders with chrome plated rod, power
up/gravity down.
Bushings – All pivot points equipped with Teflon lined bushings. Leg rollers have
Southworth exclusive wear indicators.
Weight – 650 lbs (approx) – Freight class #70

Exclusive wear indicating rollers - Over years of service life maintenance is finally made easy.
Exclusive comfort edge platform - Molded edge on platform is easy on the operator.
Low pressure hydraulic system - Reduces possibility of system leakage and promotes seal life.
Lift cylinder vented to reservoir - No oily mess under lift and no housekeeping problems.
Fully adjustable down speed - “Dial in” the speed needed for each application change.
Full width-straight through axles - Increases stability and tracking throughout the travel range.
Extra wide base and plate rollers - For increased stability throughout the travel range.
Heavy duty torque tubes - Improves stability under dynamic or eccentric loads.
Pins, rollers and bushings - All bushings are lubricated-for-life.
Heavy duty wire braided hoses - Burst strengths all 400% greater than the operating pressure.
Built-in, hinged safety chocks - Prevents accidental lowering during maintenance
Full profiled scissors legs - Maximum thickness where it is needed - at the main axle pin.

Two year parts and labor warranty - The strongest warranty in the industry!

Shipment: 2- 3 weeks or less

Optional:
Add for 3/60/230 or 460 volt electics $245.00
Add for 48" x 96" platform $195.00

Click for a larger picture

SOUTHWORTH - LS6-36 HYDRAULIC LIFT TABLE

Price: $4,650.00
Machine Stock Number: LS6-36-Q
Condition: New
FOB: AR-MANILA
Electrical: 230/460 V, 3 Ph, 60 Cy

Description:
Capacity – 6,000 lb. uniform load.
Platform – 48” x 96” (or 36" x 84") smooth plate with Comfort Edge.
Base Frame – 24” x 48” with lag plates and maintenance device.
Lowered Height – 7 ¼”
Vertical Travel – 36”
Raised Height – 43 ¾”
Elevating Time – approx. 22 seconds.
Lowering Time – Adjustable with pressure compensated flow control.
Power Unit – Internally mounted with 3.2 HP TENV electric motor, 2.8 GPM hydraulic
pump, valving, and reservoir filled with oil.
Primary Voltage – 230-460/3/60
Control Voltage – 115/1/60
Control – NEMA 1 footswitch with safety cover. Includes 10 ft of straight cord.
Control Panel – NEMA 1 Control Panel mounted & wired.
Actuation – Three 3 ½” low pressure cylinders with chrome plated rod, power
up/gravity down.
Bushings – All pivot points equipped with Teflon lined bushings. Leg rollers have
Southworth exclusive wear indicators.
Finish – Grey machinery enamel.
Warranty – All parts and labor are covered for TWO FULL YEARS
Weight – 1100 lbs (approx) – Freight class #70

Exclusive wear indicating rollers - Over years of service life maintenance is finally made easy.
Exclusive comfort edge platform - Molded edge on platform is easy on the operator.
Low pressure hydraulic system - Reduces possibility of system leakage and promotes seal life.
Lift cylinder vented to reservoir - No oily mess under lift and no housekeeping problems.
Fully adjustable down speed - “Dial in” the speed needed for each application change.
Full width-straight through axles - Increases stability and tracking throughout the travel range.
Extra wide base and plate rollers - For increased stability throughout the travel range.
Heavy duty torque tubes - Improves stability under dynamic or eccentric loads.
Pins, rollers and bushings - All bushings are lubricated-for-life.
Heavy duty wire braided hoses - Burst strengths all 400% greater than the operating pressure.
Built-in, hinged safety chocks - Prevents accidental lowering during maintenance
Full profiled scissors legs - Maximum thickness where it is needed - at the main axle pin.

Optional:
Photo Eye Auto-Leveling Package:
Includes adjustable photoelectric sensor and control panel mounted to a stanchion.
Panel includes Index ON/OFF selector switch, Lift UP/DOWN selector switch, and
E-Stop button. An adjustable timer is included to delay (up to 10 seconds) automatic
movement of lift platform. A separate stanchion with reflector is also included.
Customer to specify Index UP or Index DOWN. (accurate for panel thickness of 1/2"
or more) $975.00
Casters 6" x 3": Two swivel and two rigid 6" x 3" texite casters mounted to sides
of base frame for lengthwise traverse. Includes one foot operated floor lock on
one end. Lowered height: 12 1/4" Raised height: 48 1/4" $785.00

Lead time – Shipment will be 3-4 weeks from order.
Terms -- 25% down with order, balance net 30 days with approved credit

SOUTHWORTH - LST8-36 HYDRAULIC LIFT TABLE

Price: $8,990.00
Machine Stock Number: LST8-36-Q
Condition: New
FOB: AR-MANILA
Electrical: 115 V, 1 Ph, 60 Cy

Description:
Capacity – 8,000 lb. uniform load.
Platform – 48” x 144” smooth plate.
Base Frame – 24” x 48” with lag plates and maintenance device.
Lowered Height – 6 ¾”; Vertical Travel – 36”; Raised Height – 42 ¾”
Elevating Time – approx. 84 seconds.
Lowering Time – Adjustable with pressure compensated flow control.
Power Unit – Internally mounted with 1.0 HP TENV electric motor, .85 GPM hydraulic pump, valving, and reservoir filled with oil.
Control – NEMA 1 footswitch with safety cover. Includes 10 ft of straight cord.
Actuation – Four 3 ½” Southworth low pressure cylinders with chrome plated rod, power
up/gravity down.
Bushings – All pivot points equipped with Teflon lined bushings. Leg rollers have
Southworth exclusive wear indicators.
Weight – 1250 lbs (approx)

Exclusive wear indicating rollers - Over years of service life maintenance is finally made easy.
Low pressure hydraulic system - Reduces possibility of system leakage and promotes seal life.
Lift cylinder vented to reservoir - No oily mess under lift and no housekeeping problems.
Fully adjustable down speed - “Dial in” the speed needed for each application change.
Full width-straight through axles - Increases stability and tracking throughout the travel range.
Extra wide base and plate rollers - For increased stability throughout the travel range.
Heavy duty torque tubes - Improves stability under dynamic or eccentric loads.
Pins, rollers and bushings - All bushings are lubricated-for-life.
Heavy duty wire braided hoses - Burst strengths all 400% greater than the operating pressure.
Built-in, hinged safety chocks - Prevents accidental lowering during maintenance
Full profiled scissors legs - Maximum thickness where it is needed - at the main axle pin.

Two year parts and labor warranty - The strongest warranty in the industry!

Shipment: 3- 4 weeks or less

Optional:
Add for 3/60/230 or 460 volt electics $245.00
Add for exclusive comfort edge platform $100.00

SOUTHWORTH - LST8-48 LUMBER LIFT

Price: $14,235.00
Machine Stock Number: LST8-48
Condition: New
FOB: AR-MANILA
Electrical: 460 V, 3 Ph, 60 Cy

Description:
Capacity – 7,000 lb. uniform load due to conveyors on platform
Platform – 48” x 192” with cross roller conveyors, 24" overall width by 48" long sections with 2.5" diameter rolls on 4" centers, approximately 9.5" spacing between sections.
Base Frame – 24” x 168” with spreader section, lag plates and maintenance device.
Lowered Height – 12 3/8” top of rolls; Vertical Travel – 24”; Raised Height – 36 3/8”
Elevating Time – approx. 18 seconds.
Lowering Time – Adjustable with pressure compensated flow control.
Power Unit – Internally mounted with 3.2 HP TENV electric motor, 2.8 GPM hydraulic pump, valving, and reservoir filled with oil.
Control – 115 volt, NEMA 1 footswitch with safety cover. Includes 20 ft of straight cord.
Actuation – Four 3 ½” Southworth low pressure cylinders with chrome plated rod, power
up/gravity down.
Bushings – All pivot points equipped with Teflon lined bushings.
Weight – 2500 lbs (approx)

Exclusive wear indicating rollers - Over years of service life maintenance is finally made easy.
Low pressure hydraulic system - Reduces possibility of system leakage and promotes seal life.
Lift cylinder vented to reservoir - No oily mess under lift and no housekeeping problems.
Fully adjustable down speed - “Dial in” the speed needed for each application change.
Full width-straight through axles - Increases stability and tracking throughout the travel range.
Extra wide base and plate rollers - For increased stability throughout the travel range.
Heavy duty torque tubes - Improves stability under dynamic or eccentric loads.
Pins, rollers and bushings - All bushings are lubricated-for-life.
Heavy duty wire braided hoses - Burst strengths all 400% greater than the operating pressure.
Built-in, hinged safety chocks - Prevents accidental lowering during maintenance
Full profiled scissors legs - Maximum thickness where it is needed - at the main axle pin.

Two year parts and labor warranty - The strongest warranty in the industry!

Shipment: 5- 6 weeks after receipt of approved drawings and deposit
TEMS: 25% down with order, balance Net 30 with approved credit.

SOUTHWORTH - PT33-E HYDRAULIC LIFT TABLE

Price: $2,990.00
Machine Stock Number: PT33E-Q
Condition: New
FOB: AR-MANILA
Electrical: 110 V, 1 Ph, 60 Cy

Description:
PalletPal Portable Lift Truck, battery operated.
Capacity – 3,300 lb. (evenly distributed load).
Actuation – Electric Lift with Manual Drive.
Fork (lowered height) – 3 ½”
Fork (raised height) – 31 ½”
Fork O.D. – 27” O.D.
Fork Length – 48”.
Load Center – 24” from heel of forks.
Turning Radius – 180 Degrees
Lifting Motor 12V DC 1.1 kW - Electric
Safety – Overload valve protection and hose rupture safety valve.
Battery – 12V DC (Spiralcell Technology) True Zero Maintenance. Completely
sealed, absorbed electrolyte design means no spills, leaks, or corrosion. Delivers
high power output both faster and longer than conventional batteries.
Battery Charger – The battery indicator monitors voltage and remaining charge.
Quick Clips – for installation and removal of battery without tools.
Warranty – All parts and labor are covered for TWO FULL YEARS
Weight – 375 lbs (approx) – Freight class #175

Lead time – Shipment will be 2-3 weeks after receipt of purchase order.

Showing 7 Machines

Last Updated: 8/6/2010