|
New Equipment: By Type | By Manufacturer
|
|
All Listings >
Brand: SAFETY SPEED CUT
1-10 || 11-15
New Machine Listings
|
|
|
SAFETY SPEED CUT - 3400 VERTICAL PANEL ROUTER
|
|
Price: $3,999.00
Machine Stock Number: 725
Condition: New
FOB: MN-ANOKA
Electrical: 115 V, 1 Ph, 60 Cy
|
|
Description:
With Model 520 Porter Cable router motor, 3 HP, 115 volt, 15 amp, single phase, manual clamps, 1/2" collet, enclosed counter balancing weight system, two blind dado stops, start stop switch, cutting capacity 62" wide x 1-3/4" thick, panel length unlimited.
Optional:
H10 wheels -portable $ 50.00
6420 fixed stand to tilt base back $109.00
6430 pair of base extensions adds 20" each side $219.00
3430 air clamps $399.00
H6460 Quick Stop gauge with 8' rule bar $239.00 or 5' for $199
H6460 DRO digital quick stop with 8' rule bar $599.00 or 5' for $499
3470 Midway Fence with sliding stop $529.00
H6450 Stop bar, 8' long with 8 flip stops $499.00
VPR Dust dust kit with hose and wheel assm $199.00
**NEW, special packaged freight rate in Coninental U.S. Add $249.00 only!!
|
|
|
|
|
SAFETY SPEED CUT - 6400 VERTICAL PANEL SAW
|
|
Price: $3,979.00
Machine Stock Number: 6400-Q
Condition: New
FOB: MN-ANOKA
Electrical: 230 V, 3 Ph, 60 Cy
|
 |
Description:
With standard equipment to include panel saw with special worm drive power unit model 825-m 3 HP 13 amp, 120 volt single phase saw, with 8"blade size, non- marring thin material pressure holddown and enclosed counter balance weight system; with cutting capacity of 64" wide x 1-3/4" thick with panel length unlimited.
Optional:
6420 fixed stand $109.00
6440 holddown bar $189.00
VPS dust kit $199.00
740CC Industrial Vac 2.25HP, 115 CFM, 110" S.P. $699.00
H6450 stop bar with 8 flip stops $499.00
H6460 quick stop with 8' rule bar $239.00
Bronze package, includes a Stand, a set of transport Wheels, a 5ft. Quick Stop,
and a high quality 8” Saw Blade. Retail value $517! now $399.00
Silver package includes Bronze plus an 8' Quick Stop (vs 5’)
and a dust collection kit for only $599.00
Gold package includes all above plus a Midway Fence for $799.00
**NEW, special packaged freight rate in Coninental U.S. Add $249.00 only!!
|
|
|
Click for a larger picture
|
|
SAFETY SPEED CUT - 6800 VERTICAL PANEL SAW
|
|
Price: $4,429.00
Machine Stock Number: 6800-Q
Condition: New
FOB: MN-ANOKA
Electrical: 230 V, 3 Ph, 60 Cy
|
|
Description:
With standard equipment to include panel saw with special worm drive power unit model 825-M 3 HP 13 amp, 120 volt single phase saw, with 8" blade capacity, non- marring thin material pressure guard, and enclosed counter balance weight system; with cutting capacity of 76" wide x 1-3/4" thick with panel length unlimited.
Optional:
6820 fixed stand $119.00
6840 holddown bar $199.00
VPS dust kit $199.00
H6450 stop bar $499.00
H6460 quick stop $239.00
Bronze package, includes a Stand, a set of transport Wheels, a 5ft. Quick Stop,
and a high quality 8” Saw Blade. Retail value $517! now $399.00
Silver package includes Bronze plus an 8' Quick Stop (vs 5’)
and a dust collection kit for only $599.00
Gold package includes all above plus a Midway Fence for $799.00
**NEW, special packaged freight rate in Coninental U.S. Add $249.00 only!!
|
|
|
|
|
SAFETY SPEED CUT - 7400 VERTICAL PANEL SAW
|
|
Price: $9,439.00
Machine Stock Number: 7400-Q
Condition: New
FOB: MN-ANOKA
Electrical: 230 V, 3 Ph, 60 Cy
|
 |
Description:
The saw carriage travels vertically on two heavy extruded beams utilizing Dual-Vee bearings to deliver cutting accuracy to 0.005" straight and square. With 10' frame, maximum length of cut unlimited. 64" vertical cut; maximum depth of cut 2"; saw blade diameter 8"; 3 HP, 3450 rpm motor; with overall length 10', overall width of 45", overall height 96". Weight 950 lbs.
Optional:
The 7400XL offers an extra large 13' frame length
for cutting panels in excess of 10' in length. Upgrade for $760.00
740090 Scoring System $949.00
2 HP 1/60/230 volt motor, single phase, add $299.00
740CC 2.25 HP Dust Collector $699.00
LL7400 Laser Line $159.00
H6460-DRO Digital Readout for vertical cuts $499.00
** New flat freight rate to your shop! $399.00
TERMS: 25% down with order, balance net 30 days with approved credit.
|
|
|
Click for a larger picture
|
|
SAFETY SPEED CUT - C-4 VERTICAL PANEL SAW
|
|
Price: $1,599.00
Machine Stock Number: C4-Q
Condition: New
FOB: MN-ANOKA
Electrical: 230 V, 3 Ph, 60 Cy
|
|
Description:
Featuring 2-1/2 HP, 13 amp, 120 volt motor, non-marring thin material pressure guard, five foot frame length. Uses 8" blade (not included). Cutting capacity 50" wide, 1-3/4" thick, 8' long.
Options:
H10 wheels $ 50.00
H20 fixed stand $109.00
H30 extensions $159.00
C6460 (5ft) quick stop $199.00
VPS dust kit $199.00
740C Industrial Vac 1HP, 100 CFM, 90" S.P. $599.00
740CC Industrial Vac 2.25HP, 115 CFM, 110" S.P. $699.00
Bronze package, includes a Stand, a set of transport Wheels, a 5ft. Quick Stop,
and a high quality 8” Saw Blade. Retail value $517! now $399.00
Silver package includes Bronze plus an 8' Quick Stop (vs 5’)
and a dust collection kit for only $599.00
Gold package includes all above plus a Midway Fence for $799.00
**NEW, special packaged freight rate in Coninental U.S. Add $ 99.00 only!!
|
|
|
|
|
SAFETY SPEED CUT - EZ 60HA HOT AIR EDGEBANDER
|
|
Price: $8,939.00
Machine Stock Number: EZ60HA-Q
Condition: New
FOB: MN
Electrical: 220 V, 1 Ph, 60 Cy
|
 |
Description:
- Uses ½” To 1 ¾” Wide Pre-Glued Tapes Up To 1 mm Thick
- Electromagnetic End Cutters Means No Need For Compressed Air Supply
- Accutrim Edge Trim System Uses Bosch Industrial Duty Trim Motors To Ensure A Finish
That Requires No Filing Or Sanding Of Trim Edges
- Heavy Construction Reduces Vibration to Ensure Consistent & Smooth Operation.
- All Sealed Ball Bearing Rotary Movement With Teflon Impregnated Bushings
- Micro Adjust Tape Guide Make Changing Tape Widths Fast & Easy
- All Required Tooling Is Included As Standard Equipment
Specifications:
- Min. Working Length - 10" / 254 mm
- Min. Part Width - 10" / 254 mm
- Conveyor Speed - 15 feet per minute
- Physical Weight - 250 lbs
- Shipping Weight - 325 lbs estimated
- Air Pressure required - None
- Electrical Requirement - 1~, 220V, 20 amps
- CFM Requirement - 450 CFM - 4" diameter outlet
- Size: 60"L x 36"W x 40" H
- Warranty: 1 year parts
**NEW, special packaged freight rate in Coninental U.S. Add $249.00 only!!
** Buy a new one from factory before April 30th and get a $500 BestBuy Gift Card!!
|
|
|
Click for a larger picture
|
|
SAFETY SPEED CUT - EZ 60HA HOT AIR EDGEBANDER
|
|
Price: $7,939.00
Machine Stock Number: EZ60HA-58
Condition: New
FOB: ADDISON, TX.
Electrical: 220 V, 1 Ph, 60 Cy
|
|
Description:
- Uses ½” To 1 ¾” Wide Pre-Glued Tapes Up To 1 mm Thick
- Electromagnetic End Cutters Means No Need For Compressed Air Supply
- Accutrim Edge Trim System Uses Bosch Industrial Duty Trim Motors To Ensure A Finish
That Requires No Filing Or Sanding Of Trim Edges
- Heavy Construction Reduces Vibration to Ensure Consistent & Smooth Operation.
- All Sealed Ball Bearing Rotary Movement With Teflon Impregnated Bushings
- Micro Adjust Tape Guide Make Changing Tape Widths Fast & Easy
- All Required Tooling Is Included As Standard Equipment
Specifications:
- Min. Working Length - 10" / 254 mm
- Min. Part Width - 10" / 254 mm
- Conveyor Speed - 15 feet per minute
- Physical Weight - 250 lbs
- Shipping Weight - 325 lbs estimated
- Air Pressure required - None
- Electrical Requirement - 1~, 220V, 20 amps
- CFM Requirement - 450 CFM - 4" diameter outlet
- Size: 60" L x 36" W x 40" H
- Warranty: 1 year parts
- SN: 20004
** Current new price is $8,939.00
*NOTE: For stock demo unit here! One only, like new fully tested!
|
|
|
|
|
SAFETY SPEED CUT - EZ 72GP EDGE BANDER
|
|
Price: $11,999.00
Machine Stock Number: EZ72GP-Q
Condition: New
FOB: MN
Electrical: 220 V, 1 Ph, 60 Cy
|
 |
Description:
- Anodized Glue Pot Interior For Ease Of Cleaning
- Short 10-15 Minute Glue Heat Up Time for Low Temp Hot Melt Adhesives
- Electromagnetic End Cutters for thin PVC Means No Need For Compressed Air Supply
- Accutrim Edge Trim System Uses Bosch Industrial Duty Trim Motors To Ensure A Finish
That Requires No Filing Or Sanding Of Trim Edges
- Heavy Construction Reduces Vibration to Ensure Consistent & Smooth Operation.
- Automatic Timed Temperature Reduction To Save Energy
- All Sealed Ball Bearing Rotary Movement With Teflon Impregnated Bushings
- Micro Adjust Tape Guide Makes Changing Tape Widths Fast & Easy
- All Required Tooling Is Included As Standard Equipment
Specifications:
- Edgebanding Working Widths - ½” up to 1 ¾” / 13 mm to 45 mm
- Edgebanding Thickness - up to 1 mm
- Min. Working Length - 10" / 254 mm
- Min. Part Width - 10" / 254 mm
- Conveyor Speed - 24 feet per minute
- Operating Temperature - 130° - 150° Celsius
- Physical Weight - 300 lbs
- Shipping Weight - 400 lbs estimated
- Air Pressure required - None
- Electrical Requirement - 1~, 220V, 20 amps
- CFM Requirement - 450 CFM - 4" diameter outlet
- Size: 72"L x 37"W x 48" H
- Warranty: 1 year parts
**NEW, special packaged freight rate in Coninental U.S. Add $249.00 only!!
** Buy a new one from factory before April 30th and get a $500 BestBuy Gift Card!!
|
|
|
Click for a larger picture
|
|
SAFETY SPEED CUT - EZ 72GP EDGE BANDER
|
|
Price: $10,899.00
Machine Stock Number: EZ72GP-58
Condition: New
FOB: ADDISON, TX.
Electrical: 220 V, 1 Ph, 60 Cy
|
|
Description:
- Anodized Glue Pot Interior For Ease Of Cleaning
- Short 10-15 Minute Glue Heat Up Time for Low Temp Hot Melt Adhesives
- Electromagnetic End Cutters for thin PVC Means No Need For Compressed Air Supply
- Accutrim Edge Trim System Uses Bosch Industrial Duty Trim Motors To Ensure A Finish
That Requires No Filing Or Sanding Of Trim Edges
- Heavy Construction Reduces Vibration to Ensure Consistent & Smooth Operation.
- Automatic Timed Temperature Reduction To Save Energy
- All Sealed Ball Bearing Rotary Movement With Teflon Impregnated Bushings
- Micro Adjust Tape Guide Makes Changing Tape Widths Fast & Easy
- All Required Tooling Is Included As Standard Equipment
Specifications:
- Edgebanding Working Widths - ½” up to 1 ¾” / 13 mm to 45 mm
- Edgebanding Thickness - up to 1 mm
- Min. Working Length - 10" / 254 mm
- Min. Part Width - 10" / 254 mm
- Conveyor Speed - 24 feet per minute
- Operating Temperature - 130° - 150° Celsius
- Physical Weight - 300 lbs
- Shipping Weight - 400 lbs estimated
- Air Pressure required - None
- Electrical Requirement - 1~, 220V, 20 amps
- CFM Requirement - 450 CFM - 4" diameter outlet
- Size: 72"L x 37"W x 48" H
- Warranty: 1 year parts
- SN: 40003
* Current new price is $11,999,00
*NOTE: For stock demo unit here! One only, like new fully tested!
|
|
|
|
|
SAFETY SPEED CUT - H 4 VERTICAL PANEL SAW
|
|
Price: $2,179.00
Machine Stock Number: 731
Condition: New
FOB: MN-ANOKA
Electrical: 230 V, 3 Ph, 60 Cy
|
|
Description:
Featuring 2-1/2 HP, 13 amp, 120 volt motor, non-marring thin material pressure guard, ten foot frame length. Uses 8" blade (not included). Cutting capacity 50" wide, 1-3/4" thick, panel length unlimited. Shipping weight 197 lbs.
Optional accessories:
H-10 wheels $ 50.00
H-25 fixed stand $119.00
H-30 extensions upper $159.00
H-440 hold down bar $179.00
Bronze package, includes a Stand, a set of transport Wheels, a 5ft. Quick Stop,
and a high quality 8” Saw Blade. Retail value $517! now $399.00
Silver package includes Bronze plus an 8' Quick Stop (vs 5’)
and a dust collection kit for only $599.00
Gold package includes all above plus a Midway Fence for $799.00
**NEW, special packaged freight rate in Coninental U.S. Add $149.00 only!!
|
|
|
|
|
SAFETY SPEED CUT - H 5 VERTICAL PANEL SAW
|
|
Price: $2,369.00
Machine Stock Number: 732
Condition: New
FOB: MN-ANOKA
Electrical: 230 V, 3 Ph, 60 Cy
|
|
Description:
Featuring 2-1/2 HP, 13 amp, 120 volt motor, non-marring thin material pressure guard, ten foot frame length. Uses 8" blade (not included). Cutting capacity 64" wide, 1-3/4" thick, panel length unlimited. Shipping point 220 lbs.
Optional:
H-10 wheels $ 50.00
H-20 stand $109.00
H-30 extensions lower $159.00
H-550 hold down bar $189.00
Bronze package, includes a Stand, a set of transport Wheels, a 5ft. Quick Stop,
and a high quality 8” Saw Blade. Retail value $517! now $399.00
Silver package includes Bronze plus an 8' Quick Stop (vs 5’)
and a dust collection kit for only $599.00
Gold package includes all above plus a Midway Fence for $799.00
**NEW, special packaged freight rate in Coninental U.S. Add $149.00 only!!
|
|
|
|
|
|
|
1-10 || 11-15 |
Last Updated: 8/6/2010
|
|
