|
New Equipment: By Type | By Manufacturer
|
|
All Listings >
Brand: RITTER
1-10 || 11-20 || 21-30 || 31-32
New Machine Listings
|
|
|
RITTER - DOOR SYSTEM
|
|
Price: $9,995.00
Machine Stock Number: R1480-Q
Condition: New
FOB: CA-ANTIOCH
Electrical: 110 V, 1 Ph, 60 Cy
|
|
Description:
Model R1480 Raised panel door machine for production of complete one piece MDF square or arched doors. The raised panel door machine produces, square cornered doors for a cost that is affordable. Standard features are 48" x 96" table with legs and six AC-20 cylinders; includes three detail routers, hogging router assembly with tooling, glass door router with bit, and door lip station with tooling. Plus adjustable fences, eyebrow templates, set of 10, Cathedral Arch templates, set of 7, dust hoods and hoses (3), five router bridge with foot treadle with manifold, regulator and gauge.
Options:
H58 additional hog router cutter $289.00
R1475A additional tooling set of 3 $575.00
R1475B optional tooling set of 2 $575.00
H250 additional door lip cutter $ 78.00
H251 additional glass door cutter $ 78.00
Terms: 50% down with order, Balance Net 30 days with approved credit!
|
|
|
|
|
RITTER - CR-205 EDGE SANDER
|
|
Price: $4,532.00
Machine Stock Number: 205503
Condition: New
FOB: CA-ANTIOCH
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
(CR205503) Model 205-50-6" x 132" edge sander with 3 HP TEFC motor, 8" x 50" graphite covered maple platen; fabricated steel base; hard maple tables and platens; swing away style dust/safety hood, precision ground aluminum drive and idle pulleys; magnetic starter; foam block/dead head combination. Air jet cleaning device, 6-way wooden front table adjustment; tilting wooden end table. 750 lbs.
OPTIONAL:
Add for 3 HP, 1 Phase, 220 Volt TEFC $295.00
Add for additional hardwood table oppposite side, non-tilting $800.00
Terms: 50% down with order, Balance Net 30 days with approved credit.
|
|
|
|
|
RITTER - CR-245 EDGE SANDER
|
|
Price: $7,450.00
Machine Stock Number: CR245728-Q
Condition: New
FOB: CA-ANTIOCH
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
(CR245728) 8" x 176" abrasive belt size, 6-way adjusting front table, edge belt sander with 7.5 HP TEFC motor, 10" x 72" hard maple platen, fabricated steel base, magnetic motor control, featuring swing away safety/dust hoof with air jet belt cleaning device; rubber covered aluminum drive pulley, 4" aluminum idler pulley, rigid tracking system. Tilting front table; tilting wooden end table; and raising and lowering device.
Optional:
12" x 176" abrasive belt capacity with 14" steel
platen and 10 HP drive motor $3,040.00
10" steel platen $ 940.00
Steel front table $1,045.00
Rear non-tilting steel table, steel platen and dust
hood less end table $2,305.00
Terms: 50% down with order, Balance Net 30 days with approved credit!
|
|
|
|
|
RITTER - CR-245 EDGE SANDER
|
|
Price: $6,295.00
Machine Stock Number: CR245568-Q
Condition: New
FOB: CA-ANTIOCH
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
(CR245568) 8" x 144" abrasive belt size, 6-way adjusting front table, edge belt sander with 7.5 HP TEFC motor, 10" x 56" graphite covered hard maple platen, fabricated steel base, magnetic motor control, featuring swing away safety/dust hoof with air jet belt cleaning device; rubber covered aluminum drive pulley, 4" aluminum idler pulley, rigid tracking system; tilting 6-way front maple table, 12" x 56" ; tilting end maple table; raising and lowering device; form block/dead head combination. 908 lbs.
Optional:
12" X 144" abrasive belt capacity with 10 HP motor ADD $2,830.00
10" Steel Platen $ 698.00
Steel front table $ 803.00
Rear nontilting steel table, steel platen and dust hood
less end table $2,095.00
Terms: 50% down with order, Balance Net 30 days with approved credit!
|
|
|
|
|
RITTER - CR25814 EDGE BELT SANDER
|
|
Price: $12,995.00
Machine Stock Number: 26814-Q
Condition: New
FOB: CA-ANTIOCH
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
Designed for dovetailed drawer boxes up to 13" high and 50" wide. Drawer boxes common to the furniture, cabinet and custom woodworking industry. The ability to use the machine for a variety of high platen sanding applications makes this the industry's largest vertical capacity sander.
STANDARD FEATURES: CR25814
14" x 144" abrasive belt size
16" x 56" graphite covered steel platen
10 HP spindle drive motor, tefc
1 HP oscillation motor
Precision oscillation guides rails
Standard duty idler assembly
11" x 50" bias tilting steel front work table
Manual table height adjustment
Right angle fence
(2) Swing away dust hoods
(2) 4" dust hood outlets
Air-Jet belt cleaning device
Top and Rear abrasive belt guard
Magnetic controls, 3-phase 230/460 volt
Oscillation / non oscillation selector switch
Machine weight: 1675 lbs
|
|
|
|
|
RITTER - R-10TESA SHAPER-SLIDE TABLE
|
|
Price: $1,295.00
Machine Stock Number: R10TESA
Condition: New
FOB: CA-ANTIOCH
Electrical: NOT APPLICABLE
|
|
Description:
Shaper tenoning attachment, complete with 3 swing away cylinders, 2" material capacity under holddowns, adaptable to any shaper with 3/4" wide x 3/8" deep slot; three air operated holddowns, lever activated; manually controlled stroke; accepts material up to 12" wide x 2" thick; 90 degree squaring fence, ground aluminum table.
_
Optional:
R-11TESA with 6 cylinders and 15" material cap…..$1,995.00
Add for 18" pneumatic stroke with foot pedal……...$1,995.00
_
Terms: 50% down with order, Balance Net 30 days with approved credit!
|
|
|
|
|
RITTER - R-11 HEAVY DUTY SHAPER
|
|
Price: $9,795.00
Machine Stock Number: R1110-Q
Condition: New
FOB: CA-ANTIOCH
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
Two Interchangeable Spindles, 1-1/4" with 6" Usable Spindle Under Nut. All Ritter Shapers Now Feature Precision Ground Spindles To Insure A .001" Maximum Runout!
Complete Set of Spindle Spacers, 1/2" - 1" ; 6" Vertical Spindle Travel Range
10 H.P. Spindle Drive Motor, TEFC with Front Mounted Load Meter and Inverter Drive Spindle Speed Control 8-Spindle Speeds, 3600, 4200, 5000, 5400, 6000, 7000, 8000, 9000
Reversing Spindle; Electronic Spindle Brake; Precision Linear Bearing Cartridge Guides
1-1/2" Diameter Lead Screw Spindle Adjustment; Digital Display Spindle Height Positioning
Lateral fence positioning capability. 4-position turret stops for infeed and outfeed fences.
48" x 38" Table Area; 38" Work Height; 3/4" Wide Table Slot
8" Maximum Throat Diameter; 7-3/4" Maximum Cutter Diameter
Tapped Power Feeder Mounting Holes; Machine Weight 1915 lbs.
Transition hoods supplied to 5" with a round opening, enlarged interior dust outlet is 4" dia.
Optional Features:
Powered Raising and Lowering $ 995.00
Digital Fence Setting Display $2,295.00
Additional 1 1/4" spindle w/nut & spacers $ 595.00
Terms: 50% down with order, Balance Net 30 days with approved credit!
|
|
|
Click for a larger picture
|
|
RITTER - R-1206P DOOR/FRAME CLAMP
|
|
Price: $16,750.00
Machine Stock Number: R1206P-Q
Condition: New
FOB: CA-ANTIOCH
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
Designed for architectural door and window assembly. Joinery such as cope and stick, dowels and mortise and tennon are all easily utilized by the machine. The vertical easel allows for fast and square assembly. The multiple pneumatic clamps ensure high clamping pressures in selected zones. The 6" high jaws allow for the lamination of thin materials to specified thicknesses. The floating horizontal cylinders allow for assembly of center stiles and rails and squaring prior to the final door clamping. Rapid traverse clamp jaw movement makes the machine easy to adjust for door sizes.
STANDARD FEATURES:
72" x 144" easel area
6" X 48" x 120" capacity
3/16" thick steel table surface
6" high left hand squaring platen
6" high bottom squaring platen
(20) 4" bore pneumatic clamp cylinders
pneumatic top pressure beam to 25,000 psi
3 HP rapid traverse beam adjustment motor
4" bore pneumatic end pressure cylinders
(9) door thickness spacer pods
pedestal mounted controls
24" bottom platen work height
75 degree easel angle
machine weight: 3,600 lbs
|
|
|
Click for a larger picture
|
|
RITTER - R-14 RAISED PANEL DOOR SHAPER
|
|
Price: $16,995.00
Machine Stock Number: R14-Q
Condition: New
FOB: CA-ANTIOCH
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
* (2) 1-1/4" quick change spindles
* #4 morse taper spindle nose
* 6" usable spindle under nut
* complete set of spindle spacers, 1/2" -1"
* 6" vertical spindle travel range
* 10 H.P. spindle drive motor, TEFC
* front mounted load meter
* digital display spindle speed
* inverter drive spindle speed control
* 8-spindle speeds, 3600, 4200, 5000, 5,500, 6000, 7000, 8000, & 9000 rpm
* digital spindle speed display
* reversing spindle
* electronic spindle brake
* precision linear bearing carriage guides
* 1-1/2" diameter lead screw spindle carriage adjustment
* front mounted digital display spindle height positioning
* motorized spindle raise and lower
* oversized hand wheel spindle fine adjustment
* 48" x 38" table area
* 3/4" wide table slot
* 8" maximum throat diameter
* 7-3/4" maximum cutter diameter under table
* 9" maximum cutter diameter above table
* (2) table insert rings
* independent micro-adjusting fences
* digital display fence settings
* 5" x 21" wooden fence plates
* independent dust hood housing with outlet
* tapped power feeder mounting holes
* 38" work height
* below table dust outlet
* front hinged carriage access door
* rear v-belt guard
* R10tesa tennoning attachment
* R609 24" panel crafter
* set of (10) cathedral arched templates
* R2038 8-speed reversing power feeder
* wired 3-phase 230 volt, 60 hz
* designed and manufactured in the USA
Crate dimensions: 45" x 56" x 64"
Machine weight: 1630 lbs
Terms: 50% down with order, Balance Net 30 days with approved credit!
|
|
|
Click for a larger picture
|
|
RITTER - R1475 DOOR SYSTEM
|
|
Price: $6,995.00
Machine Stock Number: R1475-Q
Condition: New
FOB: CA-ANTIOCH
Electrical: 115 V, 1 Ph, 60 Cy
|
 |
Description:
Raised panel door machine for production of complete one piece mdf square or arched doors. The raised panel door machine produces, square cornered doors for a cost that is affordable. Standard features are 36" x 72" table with legs and four AC-20 cylinders, 110 v. 1 phase detail routers (3); hogging router assembly with tooling, tooling, adjustable fences, eyebrow templates, set of 10, Cathedral Arch templates, set of 7, dust hoods and hoses (3), router bridge, foot treadle with manifold, regulator and gauge. 600 lbs. Tooling set includes a hog router cutter!
Options:
H58 additional hog router cutter $289.00
R1475A additional tooling set of $575.00
R1475B optional tooling set of 3 $575.00
Terms: 50% down with order, Balance Net 30 days with approved credit!
|
|
|
Click for a larger picture
|
|
RITTER - R-150 DOUBLE ROW LINE DRILL
|
|
Price: $69,595.00
Machine Stock Number: R150-Q
Condition: New
FOB: CA-ANTIOCH
Electrical: 220 V, 3 Ph, 60 Cy
|
 |
Description:
(2) 75-Vertical Gear Driven Spindle Rows
Hardened Steel Helical Gears
(3) 25-Spindle Drill Groups per Head
32mm Spindle Centers
2368mm First to Last Spindle
10mm Bored Collets
1725 Spindle RPM
(78) Right Hand, (72) Left Hand
5" Minimum Centers Between Drill Rows
24" Maximum Throat Depth Capacity
Top Drilling for Through Bore Capability
(3) Precision Linear Drill Head Rail System with Drill Head Locks
(6) 3 H.P. Spindle Drive Motors, TEFC
(8) Spring Loaded Material Hold Downs
108" Backfence with (4) Stops
Rear head Docking for Third Row Applications
(2) Digital Drill Row Location Display Units per Drill Row
Digital Precision Drill Head Positioning and Squaring
Programmable Table Feed Cycle
Programmable Drill Depth Control
Servo Driven Dual Ball Screw Table Feed
Dual Precision Linear Table Rail System
30" x 108" Work Table Surface
Fagor #101 CNC Controller
Magnetic Motor Controls
Wired 3-Phase 230/460 Volt, 60 HZ
Foot Pedal Actuating Boring Cycle
No Tooling Required
Create Dimensions: 54" x 136" x 76"
Weight: 4550 lbs.
Optional: R15035, 440 VOLT ADD $1,995.00
Terms: 50% down with order, Balance Net 30 days with approved credit!
|
|
|
Click for a larger picture
|
|
|
|
1-10 || 11-20 || 21-30 || 31-32 |
Last Updated: 8/6/2010
|
|
