|
New Equipment: By Type | By Manufacturer
|
|
All Listings >
Brand: NEWMAN
Showing 7 Machines
New Machine Listings
|
|
|
NEWMAN - K-2S SAW-DOUBLE END
|
|
Price: $15,985.00
Machine Stock Number: 498
Condition: New
FOB: NC-GREENSBORO
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
NEW NEWMAN K-2S DOUBLE END TRIMMER. TRIMS FROM 6'TO 20'.7 1/2 HP, 3/60/230-460 VOLT TOTALLY ENCLOSED FAN COOLED MOTOR. WITHOUT SAW BLADES.
OPTIONS:
(WHEN ORDERED W/MACHINE) STARTERS FOR
TWO 7-1/2 HP SAW MOTORS AND 1-1/2 HP FEED
MOTOR, COMPLETE WITH THREE STATION PUSH
BUTTON, 3 PHASE,60 CYCLE,230-460 VOLT;
NOT INSTALLED $ 1,655.00
ES-1 1 HP GEAR BRAKE MOTOR TO CONTROL BOTH
SAW UNITS IN UNISON (STARTER NOT
INCLUDED) $ 3,895.00
SCRAP CONVEYOR (STARTER NOT INCLUDED $ 5,045.00
24" DIAMETER X 80 TEETH X 10 GAUGE CARBIDE
TIPPED SAW BLADE, $ 425.00
TERMS: 30% DEPOSIT WITH ORDER, 55% PRIOR TO SHIPMENT;
15% BAL.NET 30 DAYS WITH APPROVED CREDIT.
**12/29/06 PRICING EXPIRED AND MAY HAVE GONE UP….to be updated.
|
|
|
Click for a larger picture
|
|
NEWMAN - K-46 CHAMFERING MACHINE
|
|
Price: $14,565.00
Machine Stock Number: 898
Condition: New
FOB: NC-GREENSBORO
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
Adjustable for 4" to 6" wide stock on two sides; 8" wide stock on one side, up to
60" long; stock must be sized.
Hopper feed with 1 1/2 HP, 3 phase TEFC motor with manual starter for feed.
Feed speed approximately 15 lugs per minute.
Three lugs, 66" apart.
7 1/2 HP, 1800 RPM 3/60/230-460 volt TEFC motor for chamfering unit with two
carbide cutters, with starter and push button.
OPTION:
Extra pair carbide tipped cutters $ 600.00
Stacker $1,445.00
TERMS: 30% deposit with order, 55% prior to shipment; 15% Net 30 with approved credit.
**12/29/06 PRICING EXPIRED AND MAY HAVE GONE UP….to be updated.
|
|
|
|
|
NEWMAN - K-472 NOTCHING MACHINE
|
|
Price: $22,245.00
Machine Stock Number: 798
Condition: New
FOB: NC-GREENSBORO
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
Cam feed notching machine for 32" to 72" material complete with 2 HP motor and gear
reducer for two loading chains and feed cams.
Two 25 HP 3/60/460 volt TEFC. V-belt driven lower notching cutter units, without
cutters, but with two threaded arbors with nuts.
Magnetic starter with built-in push buttons for each of the cutterhead units and feed motor.
OPTIONS (when ordered with machine):
Extra for 230 v. current in lieu of standard 460 $ 1,605.00
Extra for 32" to 98" runners 1,105.00
For Bottom Notching Units:
One pair carbide tipped cutters for 1/2" radius notches 3,875.00.
One pair carbide tipped cutters for 3/4" radius notches 4,125.00
One pair carbide tipped cutters for 1 1/2" radius notches 4,125.00
One pair carbide tipped cutters for 1/2" and 1 1/2" radii notches 5,540.00.
Extra Arbors:
One pair extra threaded 2 1/4" diameter bottom arbors, with 3/8" x
31/6" keyway and nuts $540 ea. 1,250.00
Top Strapping Notch Units:
Strap notch unit complete with 10 HP 3/60/460 v TEFC motor and belt
drive with two 1 1/2" wide dado units mounted on friction lock collars
with carbide cutters 4,340.00
Additional dado unit mounted on friction lock collar 1,275.00
TERMS: 30% deposit with order, 55% prior to shipment; 15% Net 30
with approved credit.
**12/29/06 PRICING EXPIRED AND MAY HAVE GONE UP….to be updated.
|
|
|
Click for a larger picture
|
|
NEWMAN - KM-16 MULTIPLE CUT-OFF SAW
|
|
Price: $33,858.00
Machine Stock Number: 499
Condition: New
FOB: NC-GREENSBORO
Electrical: 460 V, 3 Ph, 60 Cy
|
 |
Description:
Overhead 5 saw multiple trimmer, to trim a min. of 18" and a max. of 16', up to 4" thick. Each saw unit to be equipped with a 7.5 HP 3 phase 60 cy. 230/460 TEFC motor. Without saw blades. Separate 2 HP variable feed unit; separate 2 HP conveyor drive unit for 12” wide lumber conveyor to run to right (29.5” high), and block conveyor 12” wide to run left (14.25” high). Lock up hooks for each saw unit. Necessary wrenches. Internal dust hoods for saw units (one 2” x 4” back & one 4” dia. outlet on top). Belt guards for saw arbor drives. Without starters.
Options:
Console complete with 7 start push buttons and
1 master stop button, with 8' conduit for use at
either end of machine. 7 starters mounted in
enclosure at rear of machine, complete wired
and ready to run on 460 volts with 110 v.
control circuit. $ 7,875.00
Add for 230 volts $ 1,130.00
Addition of one starter to console $ 905.00
Extra saw unit with 7-1/2 hp motor $5,100.00
Special 18" dia. Carbide tipped saws, 80 teeth $ 350.00
For 20' trimmer in lieu of standard 16' $3,520.00
For 18" scrap conveyor in lieu of 12" $4,060.00
Saw positioning scales $1,840.00
Saw unit air lifts $2,135.00
Terms: 30% with order, 55% prior to shipment; 15% net 30 with approved credit.
**12/29/06 PRICING EXPIRED AND MAY HAVE GONE UP….to be updated.
|
|
|
Click for a larger picture
|
|
NEWMAN - KM-16-HD MULTIPLE CUTOFF SAW
|
|
Price: $41,275.00
Machine Stock Number: KM16HD-Q
Condition: New
FOB: NC-GREENSBORO
Electrical: 460 V, 3 Ph, 60 Cy
|
|
Description:
Trim a minimum of 24" and a maximum of 16', up to 6" thick. Each saw unit equipped with a 10 HP, 1800 RPM, totally enclosed fan cooled motor and v-belt drive. Without saw blades. Separate feed unit with 2 HP totally enclosed fan cooled motor with variable drive for 8 to 20 cuts per minute. Separate drive for lumber conveyor to run to right (height 29.5") and scrap conveyor to run to left (height 14.25"), with 2 HP totally enclosed fan cooled motor. Machine equipped with 5" x 5" dust pick up openings on each saw unit; belt guards and saw guards. Lock up hooks for each saw unit.
Options:
Electric console completely wired and ready to run;
wired 460 volts with 110 volt control circuit $8,855.00
Extra starter for 460 volt $ 625.00 ea.
Electric console completely wired for 230 volt $9,980.00
Extra starter for 230 volt $ 945.00 ea.
Special carbide tipped saws, 24" dia., 80 teeth, each $ 390.00
Optional 2 HP, 1200 RPM totally enclosed fan cooled
brake motor for feed with foot pedal control $1,830.00
Additional saw unit $5,995.00
Saw positioning scales $1,760.00
For 20' trimmer in lieu of standard 16' - add $3,520.00
For 18" scrap and lumber conveyors in lieu of 12" $4,045.00
Saw unit air lift - each $2,140.00
Terms: 30% down, 55% prior to shipment, 15% net 30 days.
**12/29/06 PRICING EXPIRED AND MAY HAVE GONE UP….to be updated.
|
|
|
|
|
NEWMAN - KN-1 PALLET NOTCHER
|
|
Price: $11,970.00
Machine Stock Number: KN1-Q
Condition: New
FOB: NC-GREENSBORO
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
Complete with 15 HP, 1800 RPM, 3/60/230-460 volt totally enclosed fan
cooled motor with magnetic starter.
For notching stringers up to 3" thick.
Hardwood work table, size 72" long x 8" wide.
Removable throat plate for various notch lengths.
Mechanical stops for setting notch spacings.
Air over oil feed with foot pedal control.
Dust collection port 4" x 14-1/4".
Without cutterhead.
OPTIONS:
12" diameter x 10-1/2" wide carbide tipped dado head with 1/2" radius cutter $2,275.00
12" diameter x 10-1/2" wide carbide tipped dado head with 1-1/2" radius cutter $2,415.00
Terms: 30% deposit with the order; 55% prior to shipment; 15% net 30 from date of shipment to approved accounts.
|
|
|
|
|
NEWMAN - KV-65 CHAMFERING MACHINE
|
|
Price: $20,250.00
Machine Stock Number: 698
Condition: New
FOB: NC-GREENSBORO
Electrical: 230/460 V, 3 Ph, 60 Cy
|
 |
Description:
To chamfer 3.5" to 6" deckboards in ramdom widths.
Maximum length of boards 60".
7 1/2 HP, 1800 RPM 3/60/230-460 volt TEFC motor for chamfering head.
1 1/2 HP, 1800 RPM 3/60/230-460 volt TEFC motor for feed.
Standard machine includes electrical starters, infeed hopper feed, outfeed board stacker.
OPTION:
One pair carbide tipped cutters for 45 degree cut $ 765.00
TERMS: 30% down with order; 55% prior to shipment; 15% net 30 with approved credit
|
|
|
Click for a larger picture
|
|
|
|
Showing 7 Machines |
Last Updated: 8/6/2010
|
|
