|
New Equipment: By Type | By Manufacturer
|
|
All Listings >
Brand: MAGGI
Showing 5 Machines
New Machine Listings
|
|
|
MAGGI - 700S RADIAL ARM SAW
|
|
Price: $6,299.00
Machine Stock Number: 700S-Q
Condition: New
FOB: CA-SANTA FE SPRINGS
Electrical: 230 V, 3 Ph, 60 Cy
|
|
Description:
7.5 HP radial arm saw with self-braking motor with overload protection and direct drive; Cast-iron arm with replaceable special-steel guides; Saw carriage sliding on the 8 bearing system; Blade guard with anti-noise system; Predisposed for air suction; Over-sized table size of 64" x 44". Maximum 22" dia. blade capacity - no blades included.
Technical Data:
Motor speed 2800 RPM
Cross cut (1" deep) 25".
Cross cut (8" deep) 20".
Max. depth of cut 8"
Max. height of blade from table 1-1/2"
Max. cutting height at 45 degrees 4-1/2"
Max. cut with arm at 45 degrees 18"
Max. blade diameter 22" (not included!)
Shaft dimension 1-3/16"
Net weight 550 lb; Gross weight 700 lb.
Overall dimension 79" x 40" x 51"
|
|
|
|
|
MAGGI - BEST960 RADIAL ARM SAW
|
|
Price: $3,768.00
Machine Stock Number: BEST 960-Q
Condition: New
FOB: CA-SANTA FE SPRINGS
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
With 4.5 HP, 220/3/60 motor; overload protection; blade guard with anti kickback device; pre-set locking position for 45 degree cuts (left and right sides); motor tilts to 45 degrees; cast iron support arm; special steel replacement guides; sealed ball bearings (8) system for sliding mechanism; easy height adjustment system with hand wheel; self braking motor; return spring.
Specifications:
Cross cutting capacity: 1" x 35" or 4" x 33"
Maximum depth of cut, 14" blade is 4"
Maximum depth of cut, 16" blade is 5"
Blade bore diameter 1"
Max. Height of blade from table:
3 1/2" table dimensions: 47" x 43"
weight (gross/net) 700/568
*Dado capacity: 3/4"
Options:
Single phase motor, 3 HP $ 100.00
Add for changing to 440 v for stock machine $ 150.00
Dado guard and flange $ 370.00
|
|
|
|
|
MAGGI - BIG 800 RADIAL ARM SAW
|
|
Price: $2,713.00
Machine Stock Number: BIG-Q
Condition: New
FOB: CA-SANTA FE SPRINGS
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
With 4.5 HP 220/3/60 motor; overload protection; blade guard with anti kickback device; preset locking position for 45 degree cuts (left and right sides); motor tilts to 45 degrees; cast iron support arm; special steel replaceable guides; sealed ball bearing (8) system for sliding mechanism; easy height adjustment system with handwheel; self braking motor; return spring.
Specifications:
Crosscutting capacity: 1" x 31" or 4" x 28" blade diam:14"
Miter capacity (45 degrees) 28" lt;22" rt arbor size: 1"
Max. Ht. Of blade from table: 4"
Table dimensions: 47" x 37"
Weight (gross/net) 436/394
*Dado capacity: 3/4"
Optional:
Single phase motor, 3 HP $100.00
Add for changing to 440 v on stock machine $150.00
Dado guard and flange $370.00
|
|
|
|
|
MAGGI - JUNIOR 640 RADIAL ARM SAW
|
|
Price: $2,509.00
Machine Stock Number: JR640-Q
Condition: New
FOB: CA-SANTA FE SPRINGS
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
With 4.5 HP 220/3/60 motor, overload protection; blade guard with anti-kickback device; preset locking position for 45 degree cuts (left and right side); motor tilts to 45 degrees; cast iron support arm; special steel replaceable guides; sealed ball bearing (8) system for sliding mechanism; easy height adjustment system with handwheel; self braking motor; return spring.
Specifications:
Crosscutting capacity: 1" x 25" or 4" x 21"
Blade diam: 14" miter capacity (45 degrees): 23" lt;18" rt
Arbor size: 1"
Max. Ht. Of blade from table: 3"
Table dimensions: 34" x 43"
Weight (gross/net): 400/374 lbs.
*Dado capacity: 3/4"
Optional:
Single phase motor, 3.5 HP, 220 volt $150.00
Add for changing to 440 v on stock machine $150.00
Dado guard and flange $370.00
|
|
|
|
|
MAGGI - PROFESSIONAL RADIAL ARM SAW
|
|
Price: $1,968.00
Machine Stock Number: PRO-Q
Condition: New
FOB: CA-SANTA FE SPRINGS
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
With 2.5 HP 3 phase 220 volt motor, overload protection, blade guard with anti-kickback device; preset locking position for 45 degree cuts; motor tilts to 45 degrees; cast iron support arm; special steel replaceable guides; sealed bearing (4) system for for sliding mechanism; easy height adjustment system with handwheel; self braking motor; and return spring.
Specifications:
Crosscutting capacity 15-3/4"
Blade diameter 12"
Maximum ht of blade from table 2-1/2"
Arbor size 5/8"
Table dimensions 22" x 31-1/2"
Weight (gross/net) 168/156 lbs.
Optional:
Add for single phase1.5 HP motor $100.00
|
|
|
|
|
|
|
Showing 5 Machines |
Last Updated: 8/6/2010
|
|
