|
New Equipment: By Type | By Manufacturer
|
|
All Listings >
Brand: C.R. ONSRUD
Showing 3 Machines
New Machine Listings
|
|
|
C.R. ONSRUD - 500 SS INVERTED PIN ROUTER
|
|
Price: $3,340.00
Machine Stock Number: 500SS-Q
Condition: New
FOB: NC-TROUTMAN
Electrical: 230 V, 1 Ph, 60 Cy
|
|
Description:
3.25 HP inverted router with 20 throat capacity
Machine frame and spindle mount - cast iron
Support base - welded steel, sound insulated
Throat capacity - 20"
Table - 24" x 36" acrylic topped phenolic with dust collection chamber
Motorized spindle - 22,000 RPM, 3 1/4 H.P. commercial duty production router motor. 120 V., 1 PH (220V., 50/60Hz optional). Raised and lowered by mechanical foot pedal (other router motors available on special request--including high cycle.)
Self-releasing collet-chuck assembly is manufactured from heat-treated alloy steel. Collets supplied with machines are 1/2", 3/8" and 1/4" collets.
Guide Pin Assembly - Extends and retracts automatically by pneumatic cylinder controlled by a foot pedal. 4 quick change guide pins included, 1/4", 5/16", 3/8", 1/2". (Any size available optionally)
Upper and lower depth stop
Three position turret depth stop - This allows three infinitely adjustable cutting heights with the simple movement of a lever. This is particularly helpful when cutting very thick material that must be cut in two passes, or while cutting at several different levels on the same part.
Foot pedal lock
Requirements - Dust collection: 200 CFM Compressed air: 100 psi, 0.5 CFM Shipping weight: 420 lbs
OPTIONAL EQUIPMENT:
VACUUM SYSTEMS FOR VACUUM CHUCKING:
VTS-10CFM: 3/4" H.P. Electric, 10CFM unit - Includes thermally protected motor and pump with muffler, filter and gauge as a complete unit ready to plug into 115/220 volt, 50/60 cycle, single (1) phase power. Includes control hand-valve with filter, vacuum gauge, and mounting hardware. Piping, fittings, 3/8" x 1/8" closed-cell foam vacuum tape and instructions also included
.
.. $ 899.00
VTS-4CFM: Air operated, 4 CFM Venturi Type Vacuum Generator System Includes control hand valve with filter, vacuum gauge, and mounting hardware. Piping, fittings, and 3/8" X 1/8" closed cell foam vacuum tape and instructions are also included. (Requires an additional 6 CFM of compressed air when operating)
. $ 419.00
TABLES:
562-14: Grooving of table top, acrylic topped tables only, any size. For running porous materials such as MDF with Vacuum template systems
$ 100.00
|
|
|
|
|
C.R. ONSRUD - 750 SS INVERTED PIN ROUTER
|
|
Price: $8,680.00
Machine Stock Number: 750SS-Q
Condition: New
FOB: NC-TROUTMAN
Electrical: 230 V, 3 Ph, 60 Cy
|
|
Description:
Medium depth cuts (up to 3/4" with oak or 1" with pine, for example).
5 HP, 3PH (single phase optional) for 20,000 rpm through a heavy duty spindle.
30" throat.
Pneumatically retracting cutter and guide pin.
Fog mist lubricated bearings.
Automatic prelubrication of spindle bearings each time spindle is started--bearings never start dry.
Self-releasing collet (no risky tapping of expensive carbide bits to free them).
Full one year limited warranty.
A 24" x 36" x 1 1/2" acrylic-topped table that absorbs cutting vibrations without marring the workpiece (other tables available on request).
OPTIONAL EQUIPMENT:
(230V 1Ph option)
.$9,180.00
VACUUM SYSTEMS FOR VACUUM CHUCKING:
VTS-10CFM: 3/4" H.P. Electric, 10CFM unit - Includes thermally protected motor and pump with muffler, filter and gauge as a complete unit ready to plug into 115/220 volt, 50/60 cycle, single (1) phase power. Includes control hand-valve with filter, vacuum gauge, and mounting hardware. Piping, fittings, 3/8" x 1/8" closed-cell foam vacuum tape and instructions also included
.
.. $ 899.00
VTS-4CFM: Air operated, 4 CFM Venturi Type Vacuum Generator System Includes control hand valve with filter, vacuum gauge, and mounting hardware. Piping, fittings, and 3/8" X 1/8" closed cell foam vacuum tape and instructions are also included. (Requires an additional 6 CFM of compressed air when operating)
. $ 419.00
TABLES:
562-13: 24" (deep) X 36" (wide) Table
...
...STANDARD
562-29-OPTION: 31.5" (deep) X 47.5" (wide). $ 200.00
562-14: Grooved table top, acrylic topped tables only, any size. For running porous materials such as MDF w/Vacuum template system. $100.00
DIGITAL READOUT:
Displays cutter height above table
.
$ 895.00
577-2 LOWER DEPTH STOP:
The lower depth stop allows the retracted height of the cutter to be limited to the depth that optimizes the stroke length for the shortest possible cycle time
$ 100.00
485-3 RISER BLOCK: Adds an extra 1-1/2" clearance between the over-arm and the table, for machining taller parts
..$ 400.00
|
|
|
|
|
C.R. ONSRUD - 900 VS INVERTED PIN ROUTER
|
|
Price: $12,400.00
Machine Stock Number: 900VS-Q
Condition: New
FOB: NC-TROUTMAN
Electrical: 230/460 V, 3 Ph, 60 Cy
|
|
Description:
SPINDLE ASSEMBLY: Super precision spindle machined and ground from special alloy steel for accuracy, rigidity and long life.
SPINDLE BEARINGS: Preloaded, high speed, heavy duty ball bearings for extreme rigidity under heavy loads and deep cuts.
SPINDLE LUBRICATION: Lubricated by visible oil mist feeder.
SPINDLE TRAVEL: 0" - 3" by pneumatic foot pedal. Plunge speed is variable via a rotary control knob.
GUIDE PIN UNIT: Extends and retracts by pneumatic cylinder triggered by spindle movement.
DRIVE MOTOR: Standard motor is 10 H.P., heavy duty, totally enclosed fan cooled, 3,600 RPM, 230/460 volt, 60 cycle, three-phase electric. *Also available: 380 volt and 415 volt 50 cycle three phase, 575 volt 60 cycle three phase.
DRIVE BELT: Endless flat belt of specially formulated rubber and fabric for long life and smooth vibration free power transmission
SPINDLE SPEED: 21,000 RPM Standard, 25,000 Max. RPM can be varied via optional quick change pulleys, down to 9,500 RPM (in approximately 1,000 RPM increments).
COLLET: Self-releasing collet-chuck assembly is manufactured from heat-treated alloy steel. Collets are available in virtually any size, ranging from 1/8" capacity through 3/4" capacity, including metric sizes. Standard sizes supplied with machines are 1/2", 3/8" and 1/4" collets.
MAIN FRAME: Heavy wall, stress relieved cast iron.
TABLE: 31-2" x 47-2" x 1-3/4" acrylic topped phenolic that will not mar the work-piece and absorbs cutting vibrations.
DUST COLLECTION SYSTEM: Grill and chamber built into table for highly efficient dust collecting.
THROAT CLEARANCE: Crotch of C- frame to center of spindle and guide pin 36-1/4".
ELECTRICAL CONTROLS: Low voltage (110V) magnetic motor-starter and interlock controls with push button Stop/Start. Cutler-Hammer Freedom Series Starter with adjustable overload protection.
STANDARD ACCESSORIES: Includes a full set of wrenches for machine set-up, tooling kit, and preliminary instruction manual.
PNEUMATIC CONTROLS: Foot valve retracts guide pin and spindle. Safety feature will not allow cutter to engage work piece until guide pin is in its full down position. Machine will not start unless air pressure is present on machine.
GUIDE PINS: Interchangeable guide pins mount in retracting guide pin assembly. Available in any size inch or metric. Standard with machine are 1/4", 5/16", 3/8" and 1/2" diameter guide-pins.
MAIN DEPTH STOP: Infinitely adjustable and conveniently located for quick and exact cutter height adjustment.
THREE POSITION TURRET DEPTH STOP: Three independently adjustable and easily accessible stops for quick and convenient multi-level routing.
SAFETY FEATURE: Cutter fully retracts beneath the surface of the table to keep dangerous cutting edges away from operator while positioning part.
MOTOR AND SPINDLE BRAKE:
Pneumatic Disc Braking
STANDARD
OPTIONAL EQUIPMENT:
577-2 LOWER DEPTH STOP:
The lower depth stop allows the retracted height of the cutter to be limited to the depth that optimizes the stroke length for the shortest possible cycle
. $ 100.00
485-3 RISER BLOCK: Adds an extra 1-1/2 inches clearance between the overarm and the table, for machining taller parts
..$ 400.00
VACUUM SYSTEMS FOR VACUUM CHUCKING:
VTS-10CFM: 3/4" H.P. Electric, 10CFM unit - Includes thermally protected motor and pump with muffler, filter and gauge as a complete unit ready to plug into 115/220 volt, 50/60 cycle, single (1) phase power. Includes control hand-valve with filter, vacuum gauge, and mounting hardware. Piping, fittings, 3/8" x 1/8" closed-cell foam vacuum tape and instructions also included
...$ 899.00
VTS-4CFM: Air operated, 4 CFM Venturi Type Vacuum Generator
Includes control hand valve with filter, vacuum gauge, and mounting hardware. Piping, fittings, and 3/8" X 1/8" closed cell foam vacuum tape and instructions are also included. (Requires an additional 6 CFM of compressed air when operating
.$419.00
TABLES -
562-29: 31-1/2" (deep) x 47-1/2" (wide)
STANDARD
562-14: Grooving of table top, acrylic topped tables only, any size. For running
porous materials such as MDF with Vacuum template systems
.
.$100.00
DIGITAL READOUT:
Displays cutter height above table
.$ 895.00
|
|
|
|
|
|
|
Showing 3 Machines |
Last Updated: 8/6/2010
|
|
